Multiboard Snap Backer Generator (parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A parametric multiboard snap backer generator that makes it easier to remix your parts to Multiboard
- Ocena
- 4 / 5
- Polubienia
- 28
- Pobrania
- 253
- Wydruki
- 0
- Wyświetlenia
- 1488
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Multiboard Snap Backer Generator is a parametric OpenSCAD script that accepts length and width inputs to generate a surface with Multiboard snaps at the correct 25mm spacing (or other spacing specified by the user).
This can make remixes parts to Multiboard a breeze by using a slicer to connect this generated backer to the design you wish to mount.
To use, you must download the latest developer build at OpenSCAD (https://openscad.org/downloads.html) (scroll down to developer builds).
You must also download and install the BOSL2 library (https://github.com/BelfrySCAD/BOSL2/wiki). To install this library, open OpenSCAD and navigate to File > Show Library Folder and place the unzipped library folder there and name the folder "BOSL2".
From there, open this .scad file with OpenSCAD and you will see the parameters you can use to modify the file. To export, click 'Render' followed by 'Export'.
If you like this, be sure to check out all my parametric parts on MakerWorld: https://makerworld.com/en/@BlackjackDuck.
This file is licensed under the Multiboard license at multiboard.io/license. Uploaded with permission by Jonathan/Stella.