1 / 1
iFixit Mako Multiboard Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I had to redesign the model, because the magnet positions on my iFixit Mako case, are different.
Additionally I opted for the Rail-Pop Ins, which I really like for their secure connection.
If your magnets seem too weak you can stack two together. I use this setup with two 6x2mm magnets stacked.
Parts to be printed on their bottom.
Required Parts
- The provided 3D printed parts
- Six 6x3mm magnets
- Super glue to glue the magnets
- Four Pop-Ins Multiconnect (OI/OX) connectors
- Two OI connectors for the bottom piece, two OX for the top.
- Two OI connectors for the bottom piece, two OX for the top.