P
Printables
Gridfinity iFixit Precision Bit Driver Tray
A shallow tray to store your iFixit precision bit driver in prime position for instant grabification. Pictured is an older revision of the ⅓ height version. For Gridfinity by Zack Freedman .
Wyniki wyszukiwania: ifixit
Liczymy pasujące modele…
P
Printables
Gridfinity iFixit Mahi 1/4" Bit Driver Tray
A shallow tray to store your iFixit Mahi 1/4" Bit Driver in position for instant grabification. Pictured is an older revision of the ⅔ height version. The models have since been modified to increase tolerances in problem areas. For…
P
Printables
HSW iFixit Mako Screwdriver holder + Tweezer clamps (No Logo)
Honeycomb Storage Wall Mako driver set holder with tweezer storage. Logo has been removed from original.
P
Printables
Gridfinity IFIXIT Mako Screwdriver Kit Holder (3x2 base)
Gridfinity IFIXIT Mako Screwdriver Kit Holder (3x2 base). 6x2mm magnet recesses in the bottom. Printed in PLA with 4 perimeters, supports touching buildplate only, and adaptive cubic 15% infill. I did a filament change to make the text a…
P
Printables
Screwdriver Mount for iFixit
Keep your precision screwdrivers organized and easily accessible with this custom-designed screwdriver mount/holder, perfect for IKEA Skadis pegboards. Designed specifically to fit the iFixit screwdriver, it also accommodates other…
P
Printables
iFixit Maco wall mount
Wall holder for the iFixit Mako Precision Screwdriver set, using 3,5 mm screws. This design is a remix from iFixit Mako Screwdriver Mount for Ikea Skadis
P
Printables
Skadis / SKÅDIS iFixit Mako Holder
Holder for iFixit Mako Kit for attachment to an Ikea Skadis pegboard. It uses special pegs designed by @KimJanosch. These can be found here: Skadis/ SKÅDIS universal peg
P
Printables
iFixit Mako Multiboard Mount
I had to redesign the model, because the magnet positions on my iFixit Mako case, are different. Additionally I opted for the Rail-Pop Ins, which I really like for their secure connection. If your magnets seem too weak you can stack two…
P
Printables
iFixIt Moray Multiboard (Multipoint) mount
Wanted to mount my screwdriver set to my wall, so I did. and now you can too :)
P
Printables
Remix of Precision Screwdriver bit holder case by Alekkon (https://www.printables.com/model/1238063-precision-screwdriver-bit-holder-case-ltt-ifixit)
Changed the magnet sockets to use 10x2 mm magnets and added an indentation in the bottom of the magnet socket in case glue was needed. I removed a column of bit sockets (plus 1) and the original screwdriver socket to make room for the…
P
Printables
Replacement Top for iFixit Essentials Kit
Replacement top for the iFixit essentials kit. Designed to have 4 2x4mm cylindrical magnets glued in after printing. Great if you lose yours or if you just don't like that the original is beveled. Logo model included so that a…
P
Printables
Skådis (Skadis) - IFIXIT Mako holder
Info I wanted to make use of the ferromagnetic back-plate of the IFIXIT Mako and designed these holders for the Ikea Skådis. To use less filament I decided to split the mount. When I installed it to the Skådis it turned out, that the top…
P
Printables
Skandis Wall Mount for iFixit Manta
Skandis Wall Mount for iFixit Manta This adapter allows to mount the iFixit Manta Precision Bit Set including the cover to a IKEA Skandis wall panel! This model is free to use and distribute. It has been printed with a Prusa MK3S+ using…
P
Printables
iFixit Mako Screwdriver Mount for MultiBoard
MultiBoard/MultiBuild holder for the iFixit Mako Precision Screwdriver set. It has 2 multibin rail slots in the back to allow for mounting. I personally am using 2 Flush Large Thread - Lite Fix Points , but any of the Lit Fix Points…
P
Printables
IFixit Manta Precision Bit Set Gridfinity Box
Gridfinity Box for the IFixit Manta Precision Bit Set. The set fits stackable in the gridfinity box and has some additional small trays
P
Printables
iFixit Soldering Tips Holder
A small organiser to keep two iFixit soldering iron tips together when not installed in the tool. Ensure the tips have cooled sufficiently before storing them! I printed mine in ASA.
P
Printables
Bit Holder - E15S + iFixit Mako
Bought an ES15S Electric Screwdriver that came with a selection of bits. I wanted a storage space for my the bits included in my iFixit Mako kit and the unique bits from the ES15S. The holder holds 72 bits, which is one more than needed…
P
Printables
iFixit Essentials Gridfinity Tray
This is a basic tray that will give you a nice spot to hold your iFixit Essentials kit. I even threw in the iFixit logo. The tray uses ½ sized Gridfinity spacing, so you can use it at a 21mm or 42mm spacing. It takes up 4 x 4 standard…
P
Printables
Multiboard Magnetic iFixit Mako Driver Kit Mount (Wall Mount)
A re-implementation of daveh_dev's magnetic mount for the iFixit Mako driver kit using Multiconnect for Multiboard and direct-to-wall compatibility. Like the original, this mount lets you to quickly grab the whole kit or just remove the…
P
Printables
Multiboard iFixit Pro Tech Toolkit / Tool Roll Mount (Wall Mount)
A mount for the iFixit Pro Tech Toolkit, with or without the Mako driver kit, using Multiconnect for Multiboard and direct-to-wall compatibility. Variants Full Toolkit: Fits the full toolkit with everything inside of the tool roll.…
P
Printables
iFixit Manta Kit Multiboard Mount
I made this as a challenge to myself so I could finally go through with modeling as well as trying to make more things for my Multiboard system. This is my second model that I've design from scratch with the exception of the snaps on the…
P
Printables
iFixit Manta Kit w/ Hinge Multiboard Mount
I made this as a challenge to myself so I could finally go through with modeling as well as trying to make more things for my Multiboard system. This is my first model that I've design from scratch with the exception of the snaps on the…
P
Printables
ifixit screwdriver and bit set skadis holder (older version)
This skadis holders are for an older ifixit screwdriver and bit set which (I think) is no longer available to buy. I got these in an Smartphone repair kit from ifixit, which you also can no longer buy. There is one holder for the…
P
Printables
iFixit Essential Electronics Toolkit - Gridfinity
Overview: This is a 4x4 Gridfinity holder for an iFixit Essential Electronics Toolkit (item # IF145-348-5). I noticed most iFixit Gridfinity holders did not include a way to keep the original case stored, so I designed one. This is a very…
P
Printables
iFixit Pro Tech Toolkit Gridfinity Compatible Tray
This tray snugly fits the iFixit Pro Tech Toolkit (Item # IF145-307-4) in a 5x3 gridfinity sized grid.
P
Printables
Gridfinity iFixit Precision Bit Driver Tray
A shallow tray to store your iFixit precision bit driver in prime position for instant grabification. Pictured is an older revision of the ⅓ height version. For Gridfinity by Zack Freedman .
P
Printables
Gridfinity iFixit Mahi 1/4" Bit Driver Tray
A shallow tray to store your iFixit Mahi 1/4" Bit Driver in position for instant grabification. Pictured is an older revision of the ⅔ height version. The models have since been modified to increase tolerances in problem areas. For…
P
Printables
IFIXIT Mako Driver Kit Holder, less material, no support needed
removed some material from the front and rearranged mounts to remove need for supports.
P
Printables
iFixit's Mako driver kit sideways HSW holder (secure + engraved version)
Sideways honeycomb storage wall secure holder for iFixit's Mako driver kit, engraved. My exact settings are embedded in the 3mf file, I used OrcaSlicer. The low filament version is also included, without presets.
P
Printables
Gridfinity iFixit Precision Tweezers Bin
Compatibility This bin is compatible with the iFixit Precision Tweezers Set and probably a lot of other tweezers. General It is 1 x 4 x 3 Gridfinity units in size which corresponds to a size of 42 x 168 x 21 mm + rim heigth. The height…
P
Printables
iFixit Mako Driver Kit holder for Multiboard
Multiboard holder for iFixit mako driver kit.
P
Printables
Mini Bit Driver Adapter to Ifixit Spec Bits
If you already have bits from an ifixit toolkit, this adapter allows you to use their bits as a keychain.
P
Printables
Ifixit Mako Box with Sliding Magnetic Tray
Before you start , note that the measurements are modified to fit my box with tape on. The tape adds about 0.16mm of thickness on each side, the tt versions are adjusted accordingly, but without a spare box to test I would not know how…
P
Printables
iFixit Manta stand (A1 MINI)
REMEBER TO MIRROR ON OF THE PARTS IF YOUR ARE DOWNLOADING THE STL FILES, i would recomend to mirror the part WHITOUT the iFixit logo. If the slot in the stand is to wide for your iFixit Manta kit i would using some electircal tape to…
P
Printables
iFixit Bit Driver Torque Lever
This little adapter fits snugly against the three flats of the iFixit precision screwdriver handles (Polymer and Aluminum Bit Drivers and Marlin Fixed-Blade). By providing extra wings, higher torque can be achieved for really stubborn…
P
Printables
Gridfinity iFixit Opening Tools Holder
A holder that's 4x2x4 gridfinity units to fit my iFixit opening tools, from the Essential Electronics Toolkit . It doesn't have room for the tweezers or the screwdriver + bits, which I keep in separate bins: tweezers holder & screwdriver…
P
Printables
Multiboard Magnetic Holder for iFixIt
Magnetic mount for the iFixit Mako driver kit. Uses Multiconnect to make it Multiboard.
P
Printables
iFixit Screwdriver Mount for Ikea Skadis using low Profile T-Clip System
iFixit Screwdriver Mount works for Mako and Mahi. Modified @DavidsGotWood's mount to work with @tchoupshop_82950's low profile T-clips. Download the low profile T-Clips here: Link
P
Printables
ifixit Electric Precision Screwdriver Button Cover
I keep this in my backpack and sometimes the buttons get pressed while in the bag and run the battery flat. This prevents that. Slide up to expose the buttons, slide down to protect them. Attached design file in case you would like to…
P
Printables
Double iFixit Precision Driver Holder - 1u GridFinity Refined
This is a holder for two iFixit 4mm Precision Drivers, which will give you a 1u bin to securely store your drivers while still allowing them to be easily grabbed with one hand. I designed it to sit in front of the iFixit Manta driver kit,…
P
Printables
iFixit Manta Precision Driver Holder - 1u GridFinity Refined
This is a holder for the iFixit Manta Precision Driver, which will give you a 1u bin to securely store your driver while still allowing it to be easily grabbed with one hand. I designed it to sit in front of the iFixit Manta driver kit,…
P
Printables
iFixit Mako set holder
Ive made a holder for iFixit Mako precision toolkit. You can screw it on the wall, so you can have your toolkit on a visible place.
P
Printables
Gridfinity - iFixIt Tools and Magnetic Mat Part 1
A Gridfinity organizer for the toolkit from the iFixIt. Update based on the feedback provided in the review: -Updated 2 versions of this print, with a magnetic mat and without a magnetic mat . -Updated the height of the print, it is no…
P
Printables
Gridfinity - iFixIt Tools Part 2
A second part Gridfinity Organizer for the toolkit from the iFixIt. Any comments, suggestions or remixes are highly welcome.
P
Printables
Gridfinity (1x2) holder for iFixit iPhone battery tool set
If you bought an iFixit replacement battery kit for an iPhone, it comes with a limited set of tools for the job.
P
Printables
Ikea Skadis iFixit Essential/Manta mount
I didn't liked most of the models for the manta kit, as they first take a lot of filament and second mostly don't fit my Prusa Mini. Also there was not really a model for the Essential Kit. As all iFixit hard shells (Essential, Manta and…
P
Printables
Clip for WowStick ScrewDriver on iFixit Box
Clip for WowStick ScrewDriver on iFixit Box. I made this clip so my Wow Stick Screwdriver can clip to the ifixit box with all the bits I use. It clips to the outside of the box. Use a 3mm bit to drill the holes for the clips and 4 or 6 mm…
P
Printables
iFixit Manta Gridfinity
6x5 gridfinity bin to hold the ifixit manta set (including the lid/top). This design allows for easy access to all the bits provided but also recessed enough to allow stacking. The weight of the bits holds it down so grabbing a single…
P
Printables
iFixit Electronics Essentials kit frame
This is a frame for the iFixit Electronics Essentials toolkit. I printed it in Bambu Lab PLA Basic and I'm pleased with the results. You will need 4 M3x16mm and 4 M3x12mm screws for assembly. I used socket cap screws.
P
Printables
HSW iFixit Mako Screwdriver holder + Tweezer clamps (No Logo)
Honeycomb Storage Wall Mako driver set holder with tweezer storage. Logo has been removed from original.
P
Printables
GOEWS iFixit Mako Holder
Store your iFixit Mako kit on your GOEWS wall for easy access and location. Slides right in!
P
Printables
Simple FixHub Soldering Iron Tip Holder (iFixit)
Simple holder for six Soldering Iron Tips.
P
Printables
iFixIt Magnatic Mat Skadis Mount
A mounting option for mounting the ifixit magnetic mat on the back of the Skadis wall. Removal to the right. If you mount it on the front, you can remove the mat to the left. The Ultimount from davidmakes is used for mounting. You can…
P
Printables
Gridfinity iFixit Manta insert
I am reorganizing my tools drawers with Gridfinity . Needed something to keep iFixit Manta kit from sliding around, so I designed one. Set case does not sit very tight in the insert as I am taking it with me every now an then. Also added…
P
Printables
6 bit iFixit precision screwdriver cap
Print Settings No supports required PLA, or anything similar v1.1 Decreases the tolerance between the stem and the shell. Increased wall thickness and shell for durability. Includes multiple versions with tighter and looser tolerances for…
P
Printables
iFixit Mako Pegboard Holder (remix for 2020 or IKEA Trotten)
Clip two of these over your 2020 extrusion or 20x20 square cross section, then attach to the holder with screws. You can use M3x6 or M3x8 screws like with the original, the screw heads will sit flush in the clip. If you want a beefier…
P
Printables
HSW iFixit Manta Driver Kit Holder
About A simple yet secure Honeycomb Storage Wall holder for the iFixit Manta Driver Bit Set . The original design was based on the iFixit Wall Mount (Thingiverse) by TinkerLifeProjects . Remixed to fit a Mako Driver Set on an Ikea Skadis…
P
Printables
iFixit Manta Shelf • Skadis Interlock
Skadis Interlock Mounting System printables.com/model/1204958-skadis-interlock-a-ikea-skadis-mounting-system
P
Printables
MultiConnect IFixit Manta Mount
A quick remix to convert to MultiConnect mounting on Multiboard
P
Printables
Gridfinity iFixit Mako Gen2 with case (No Magnets)
Original by @Onelostcause - Includes both versions, with and without the original lid in the bottom.
P
Printables
Gridfinity IFIXIT ESD Tweezers Holder (1x1 base)
Gridfinity IFIXIT ESD Tweezers Holder (1x1 base). 6x2mm magnet recesses in the bottom. Printed in PLA with 4 perimeters, supports touching buildplate only, and adaptive cubic 15% infill. I did a filament change to make the text a…
P
Printables
Gridfinity IFIXIT Spudger and Pry Bar Holder (2x1 base)
Gridfinity IFIXIT Spudger and Pry Bar Holder (2x1 base). 6x2mm magnet recesses in the bottom. Printed in PLA with 4 perimeters, supports touching buildplate only, and adaptive cubic 15% infill. I did a filament change to make the text a…
P
Printables
Gridfinity IFIXIT Mako Screwdriver Kit Holder (3x2 base)
Gridfinity IFIXIT Mako Screwdriver Kit Holder (3x2 base). 6x2mm magnet recesses in the bottom. Printed in PLA with 4 perimeters, supports touching buildplate only, and adaptive cubic 15% infill. I did a filament change to make the text a…
P
Printables
iFixit Pro Skadis holder with T-Nuts
Fix your wonderful iFixit Pro toolset to a Skadis pegboard using t-nuts from https://www.printables.com/model/228663-skadis-t-nuts-mounting-system-for-ikea-skadis-pegb . I printed this model in PLA with a .4 nozzle and .2 layerheight. I…
P
Printables
iFixit Pro Tech Toolkit - Gridfinity 3x5x10 Module
This is a custom Gridfinity module designed to hold the iFixit Pro Tech Toolkit in its original case! Built at a 3x5 footprint and twice the height of a standard Gridfinity module (10 units tall), this design provides a perfect snug fit…
P
Printables
iFixit Moray Screwdriver Mount for Ikea Skadis
Made smaller to fit the box exactly, changed mounting option to T-Clip System by @LineArcLine and low-profile T-Clips by @JoshBeatty_1624529 to be flush with the back wall. Onshape Link if you want to modify it.
P
Printables
Precision Screwdriver bit holder case LTT, iFixit
Precision Screwdriver Bit Holder Case This case holds 40 precision screwdriver bits securely while allowing for easy removal. Simply lift the bits out of position when needed. The box is held together using magnets , avoiding the need for…
P
Printables
Gridifnity 2x1 ifixit phone tool holder remix
A quick remix of 1x2 Gridfinity Refined iFixit Prying Kit Holder to make space for tool bits and suction cup Please note - pictured is version one, it was fine just the bit holders were a bit to small, attached is the blend file
P
Printables
ifixit Manta underdesk holder
Simple ifixit Manta kit holder for under desk mounting. Small lip prevents accidental slide out of the kit. Printing Print 2 parts. One in correct orientation, one mirrored. Mounting All you need is 4-6 screws with diameter up to 4mm and…
P
Printables
Screwdriver Mount for iFixit
Keep your precision screwdrivers organized and easily accessible with this custom-designed screwdriver mount/holder, perfect for IKEA Skadis pegboards. Designed specifically to fit the iFixit screwdriver, it also accommodates other…
P
Printables
iFixit Framework Desktop Tile
Represent your favorite online repair community on your Framework Desktop with the iFixit Framework Tile. Print Instructions Material: Any high heat resistant filament will do. Ideally ABS. Print Arrangment: For the best print you might…
P
Printables
iFixit Logo Wall Decoration
I saw this cool looking wall deco in iFixit's video teardown of the Unitree Go2 , but coulden't find anywhere online where I could buy it, so I just decided to make one myself. Now we can all represent our favorite online repair community…
P
Printables
iFixit Pro Tech Toolkit mount (Sy's Peglock)
This model adds Peglock compatibility to the iFixit Pro Tech Toolkit holder originally designed by @toxvrd. Mount it by placing two Board Attachments on your pegboard with one empty hole between them. The attachment plates on the back of…
P
Printables
iFixIt Pro Tool Kit Basket for HSW Honeycomb Storage Wall
Basket to put the iFixIt Pro Tool Kit onto a HSW Honeycomb Storage Wall or other pegboard. Original Honeycomb Storage Wall system this attaches to: https://www.printables.com/model/152592-honeycomb-storage-wall/files Designed with M3…
P
Printables
iFixit 64 bit driver kit holder - IKEA Skadis Pegboard
Remix to mount to an IKEA Skadis Pegboard Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Notes: Supports needed for pegs Category: Tool Holders & Boxes
P
Printables
Single Mini iFixit Screwdriver Holder Skadis-10 percent larger
The existing model was a bit too tight for my Driver, so I enlarged it by 10%, keeping the back hooks the same size.
P
Printables
iFixit Screwdriver set BASE holder
This is holder for the BASE container on an iFixit screwdriver set. It takes up 3x5x3, rather than Zack Freedman's design which takes up 2x4x4. Why would you want this larger one? Well, my reasons were that everything in my drawer is 3U…
P
Printables
Gridfinity - iFixIt Tools no Magnets - Reduced-height version
I created a flatter version of this model
P
Printables
MiniTool for 4mm Hex Bits, iFixit
We build a lot of tiny robots! Specifically UK Antweight (150g) Combat robots, and these need tiny tools. Not just tiny, but easily portable and always on hand. That is the exact purpose of these mini tools and holder - fit where allen…
P
Printables
Skadis iFixIt bit/screwdriver holder
SKÅDIS Screwdriver/Bits Holder The SKADIS Screwdriver/Bits Holder is designed to keep your most-used bits and screwdriver easily accessible. This compact, well-organized holder is ideal for people who want their tools within reach while…
P
Printables
iFixit Mako Case lid (hex-mod)
Designed with a honeycomb/hexagon grid for storing screws and small parts. Needs supports, and is best printed upside down. The magnet holes are designed for 4 mm diameter 2 mm height disc magnets. They stayed in place by just pressing,…
P
Printables
Skadis iFixit Bit Set Holder
There are four brackets in total, one for each corner. Depending on your use case though, you might as well want to leave out the upper two. Especially if you plan on removing the set from the wall regularly. The design is as low profile…
P
Printables
HSW holder for iFixit Minnow bit set
I wanted to mount my iFixit Minnow bit set to my HSW but couldn't find an existing model, so I decided to learn some basic CAD skills and make my own This can be printed without supports, and I had good success printing it with PLA A…
P
Printables
Skadis ifixit tool holder
iFixit tool holder with skadis mounting. It has several square and rectangular receptacles for small tools, hexgonal slots for bits and two orifices for ifixit screwdrivers. I printed it using PLA+, 15% infill and works just fine. MODEL…
P
Printables
Gridfinity iFixit FixHub Power Station Holder
A simple Gridfinity 5x3x6u tray for holding the iFixit Soldering Iron Power Station . The power supply sits flush to allow stacking, e.g. in a gridfinity storage box like this:
P
Printables
Gridfinity iFixit FixHub Soldering Iron Holder
A simple Gridfinity 5x1x4u tray for holding the iFixit Soldering Iron . The iron sits flush to allow stacking, e.g. in a gridfinity storage box like this:
P
Printables
Slatwall mount for ifixit set
i built this model for my new Desk that uses slatwall for organization. this part was designed to fix an ifixit mako kit. Print settings, Material: PLA print profile: Bambu .2mm standard profile Supports: tree support printed standing up…
P
Printables
Basic Doughnut for iFixit Sculpting Guide
Background Information This model is a starter blender model of a basic doughnut, and is featured in both the Basic Modeling iFixit guide and Sculpting iFixit guide . If you are interested in learning the basics of Blender consider taking…
P
Printables
CMF phone Ifixit mako universal cover
This is the cover of the CMF phone adapted to cary the ifixit mako kit on your phone. I printed it in pla and it worked fine.
P
Printables
iFixit Maco wall mount
Wall holder for the iFixit Mako Precision Screwdriver set, using 3,5 mm screws. This design is a remix from iFixit Mako Screwdriver Mount for Ikea Skadis
P
Printables
iFixit Opening Pick 2.5mm Limiter for Screen Protection During Phone Repair
I just repaired my Google Pixel 7 battery. When looking at other people's experiences, I discovered that it is very easy to break the screen during removal in the repair process when pushing the opening picks too far under the display.…
P
Printables
iFixit Manta set Rugged Box
Managed to break the original case for my iFixit Manta set, so I remixed the parametric rugged box to fit the foam insert of the screwdriver set and added ribs in the lid so you can sort screws and stuff there Had to modify the latch as…
P
Printables
Ifixit Manta Holder (IKEA Skadis)
A quick remix to add slots for t-nuts or screws. Hole spacing is for IKEA Skadis so 40mm c-c. Sized for M2.5 bolts. Included both STEP and Fusion files for easy modification.
P
Printables
Spudger and Clips, Sized for the iFixit Mako Case
This is a remix of iFixit's spudger and some clips, so you can place the spudger inside the lid of the Mako Case. The spudger is 100 mm long, and optimized for FDM printing. Print with the flat side down. I glued the clips on the sidewall…
P
Printables
Skadis iFixit Minnow
A remix of Arq's holder with the pegboard part moved up, so it's easier to print.
P
Printables
Multiboard iFixit Manta Mount
This uses the Lite Multipoint Rails and requires at least two Lite Multipoint connectors. I use these . Prints without supports using the typical Multiboard settings. Step and Fusion 360 files included.
P
Printables
iFixit Mako Driver Kit Silica Gel Desiccant Holder
Two 6x3mm circular magnets are required and press fit. While filling it, make sure to lightly shake/tap the print to cause the silica gel to fully enter it. It is compatible with silica gel beads down to 0.8mm in size. I hope you enjoy…
