iFixIt Manta Driver Kit box frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Frame for iFixit Manta Driver Kit, making the box closable with a latch.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 105
- Wydruki
- 4
- Wyświetlenia
- 574
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my remake of Lukas_B's case for the iFixIt Manta kit. I made the model from scratch, and attatched the Fusion 360 file for others to use. Since I diddn't see the point of the little X-piece inserts from iFixIt's original box for the Mako kit, there is no space for them in this model, but feel free to model them in.
It fits very tightly, so if the kit has to be taken out of the case frequently, it has to be scaled up a little bit.
The two case parts are connected by a strip of filament. The latch must be downloaded from the original designer (https://www.printables.com/de/model/745472-ifixit-mako-driver-kit-box-frame/files). The latch gets attached to the case with a paper clip.