Gridfinity iFixit Precision Tweezers Bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity bin for iFixit Precision Tweezers. 1 x 4 x 3 Gridfinity units in size (42 x 168 x 21 mm). Not stackable.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 155
- Wydruki
- 7
- Wyświetlenia
- 639
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- GNU General Public License v3.0
Compatibility
This bin is compatible with the iFixit Precision Tweezers Set and probably a lot of other tweezers.
General
It is 1 x 4 x 3 Gridfinity units in size which corresponds to a size of 42 x 168 x 21 mm + rim heigth. The height was choosen to match the great work of Clough42. It is not stackable when the tweezers are inserted, therefore a version without the top rim is included. There are no holes for magnets or screws, because I dont use or plan to use them in the future. For me the bins work fine with just the Superlight Baseplates. In case I want something more secure, like … when I move to an earthquake prone region, I would use Clickfinity baseplates.
To allow for modification STEP files are included though.
Printing
I print my bins with a 0.4mm nozzle in PLA using a first layer height of 0.2 mm and a regular layer height of 0.3 mm. I Further use 2 perimeters and 15% infill. The bottom squares are connected around the outside with a 0.1 mm wide line to ensure proper brim generation if required. If brim is turned of, those will be ignored by the slicer.
Acknowledgments
This model is a remake of this model from JT_311. I would have used that one, if it had matched my prefered height.
The base bin is generated with the great FreeCAD Gridfinity Workbench.