Replacement part: iFixit Reverse Tweezers Tips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement part for the nylon tips for the iFixit reverse tweezer. Mine broke so I printed a new part for it.
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 259
- Wydruki
- 5
- Wyświetlenia
- 1118
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
Reverse Tweezer Tip replacement. Won't be as strong as the original, and you will need to thread the plastic with the screw.
Worked well with PLA - it does have a bit of flex, but if it breaks it's five minutes to print another.
Printed on a Prusa MK3s with 100% infill, no supports. 5 minute print time.
I made this file after I broke the original tweezer tip. As I don't want to contact iFixit for a replacement over such an insignificant part, I'm using 3D printing instead.
There are no printed threads in the model, so you'll have to thread it yourself. I threaded it with the screws for the tweezers. It's slightly wider than the original tip, but should suffice nonetheless.