HSW Ifixit manta holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a test design for an Ifixit manta tool kit holder. I still have to print it and make sure it works properly
- Ocena
- 3 / 5
- Polubienia
- 14
- Pobrania
- 103
- Wydruki
- 2
- Wyświetlenia
- 583
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a test design for an Ifixit manta tool kit holder. Currently the walls are a bit thin and the toolkit sit slightly loose. im working on a new model with thicker walls which should give the tool kit a tighter fit.
MK2 was stronger but the fit was too tight and the triple connectors make it had to add it to the wall
MK3 Is a hair bigger in length and width to allow the case to not fit so snug. Ive also added a single smooth connector at the base that should hold it on. im waiting to print it and test
Printed in PLA on bambu X1C
default 0.20 mm Standard profile
10% infill adaptive cubic