Liczymy pasujące modele…
This enables you to store your iFixit Essentials kit on your IKEA Skadis pegboard. V2.0: This is a new version, updated to use the supportless and easier to print Skadis Ultimount, just like DavidsGotWoods Mako Kit. Since it was requested…
This has built in supports. Print as oriented and no supports. Lid is designed to use 120mm Fan.
I am reorganizing my tools drawers with Gridfinity . Needed something to keep iFixit Manta kit from sliding around, so I designed one. Set case does not sit very tight in the insert as I am taking it with me every now an then. Also added…
6x5 gridfinity bin to hold the ifixit manta set (including the lid/top). This design allows for easy access to all the bits provided but also recessed enough to allow stacking. The weight of the bits holds it down so grabbing a single…
Supernote AX2 Manta LAMY Safari Vista Pen Clip Printing Recommendations For best strength, print vertically (with the layer lines perpendicular to the Supernote)
A simple modification of @scaryPug 's fantastic adjustable drawing tablet stand , adjusted to be a bit longer and much narrower. This is intended to hold my Supernote AX2 Manta eink tablet for note-taking, in portrait orientation. Update…
A DIN Rail mount for the Manta M8P v2.0, designed to optimize space in the back of the E3NG electronics backpack. Release notes v2: corrected placement of lower left hole, misread a dimension on the M8P v2.0 CAD file. Required materials…
I made this as a challenge to myself so I could finally go through with modeling as well as trying to make more things for my Multiboard system. This is my second model that I've design from scratch with the exception of the snaps on the…
This uses the Lite Multipoint Rails and requires at least two Lite Multipoint connectors. I use these . Prints without supports using the typical Multiboard settings. Step and Fusion 360 files included.
Managed to break the original case for my iFixit Manta set, so I remixed the parametric rugged box to fit the foam insert of the screwdriver set and added ribs in the lid so you can sort screws and stuff there Had to modify the latch as…
Replacement Pen Holder for Supernote Manta (Heart of Metal 2) Designed to replace the stock fabric loop, this custom holder matches the contour of the Heart of Metal 2 pen cap for a secure, snug fit. Secure Locking Mechanism: Once…
An AR I drew quickly and turned into 3d with Blender. Inspired by Gundam. Print it upside down please.
I wanted to purchase a Supernote, and could not decide which one just based on the specs, so I decided to print physical replicas of the two options to hold in my hands and get an idea of the size. They include a little indent to show the…
This is a holder for the iFixit Manta Precision Driver, which will give you a 1u bin to securely store your driver while still allowing it to be easily grabbed with one hand. I designed it to sit in front of the iFixit Manta driver kit,…
J'ai essayé de rester fidèle au modèle de base. Les cotes sont respectées. Je ne suis ni un pro de Fusion 360, ni un ingénieur en mécanique. C'est un modèle assez simple, au final :)
This support fits perfectly, leaving the camera centered on the drone, I screwed it in and put a little glue on the sides for better fixation. You may need to widen the hole a little with a small drill or your own wrench or screw. Esse…
This attaches to the Supernote Manta to replace the floppy elastic pen holders. The holder is specifically designed for the OHTO GS02, but other pens may fit. Feel free to remix as you see fit. For the GS02 Supernote modification, I…
Reef Minis #01: Manta Ray. A small desk sculpture of a manta ray banking over a coral reef under a curling wave, made to be printed in one color and painted by hand. ABOUT THE PICTURES The painted pictures are concept renders. The model…
This mod allows the lid (Remix of Big Tree Tech Manta M5P Case V0.2 - Lid for 92mmx14 fan) , when used with the BTT Manta M5P V0.2 Internal Fans_12mm Hole or BTT Manta M5P Body V0.2 Fans Inside (either BTT Manta M5P V0.2 Internal Fan…
Print these instead of the default arms if you are using the Bigtreetech Manta M8P (V1.0, V1.1, V2.0)
Here are the parts I designed and 3d printed for my Fimi Manta rc FPV tiltrotor model. The left and right nacelles were printed in LW-PLA and attached using strips of coloured vinyl tape. They have good clearance around the servos and…
This support fits perfectly, leaving the camera centered on the drone, I screwed it in and put a little glue on the sides for better fixation. You may need to widen the hole a little with a small drill or your own wrench or screw. Esse…
This detailed 3D model features the iconic Opel Manta in a sporty drift-tuned style, complete with wide fenders, aggressive body kit, and dual exhaust pipes. Perfect for car and tuning enthusiasts! Ideal as a decorative piece,…
Fiz esse suporte para colocar o vtx por dentro do fimi manta para melhorar a aerodinâmica , mas tem que colocar o suporte da bateria mais para atras ao depender do tamanho/tipo de bateria , fiz também entrada de ar frontais (como na foto)…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
This design is inspired by I completely remade this, because I wanted better printability with less bridging and a different fan mount direction. One of the fans is flipped, so that hot air from above the MCU is expelled. I also wanted to…
This jig is designed for the perfectionist. Specifically tailored for BigTreeTech TMC2209 modules , this tool allows you to align and seat four heatsinks simultaneously with surgical precision. Whether you are fully populating a Manta M8P…
Only requires 4mm elastic for retention. Design includes several elastic stringing options to fit different shell types. Mount to a tactical belt or build your own bandolier with 2 inch strap https://a.co/d/0bb5H35k Swap filament when…
BTT Manta M8P V2.0 Cooling 4 Fan Plate 4x DIN912 M3x35mm 4x DIN912 M3x12mm for every fan If printed from ABS please set size on X and Y to 101% for reduce shrinkage and nice fit.
Manta m8p fans mount fir 2 5010 fans for drivers and a 4010 fan for the CB.
I wanted a box with a quote from Rebecca Yarrow's book, Fourth Wing for my desk to keep pens and such in.
My stock control board got zapped, had a Manta M4P lying around and did not want to pay $200 for a new board. I will upload printer config files and guide once I fully finish the conversion. Should be compatible with the X-Max3 and…
MANTA E3EZ DIN RAIL MOUNT AND 2 FAN MOUNTS . MY EZ2209 DRIVERS HEATSINKS HAVE HORIZONTAL FINS HENCE THE DESIGN. IF SOMEONE HAS VERTICAL FINS SEND ME A DM MAYBE I CAN DO SOMETHING. These are some of the parts : 4 M3 Brass Heated Inserts 4…
I took the great model by Mpbiv421 and redrawn it so that it now fits the BTT M5P. I hope you enjoy it.
Check out my Patreon or my Printables club for more awesome models and benefits! Meet the Articulated Manta Ray! It prints in place, articulates right off the buildplate, and no assembly or post processing is required. You can choose…
I was looking for a mount for the Manta E3 EZ. Biqu published one that I liked, but it didn't allow for threaded inserts, so I created my own. My OnShape CAD is published here…
Skandis Wall Mount for iFixit Manta This adapter allows to mount the iFixit Manta Precision Bit Set including the cover to a IKEA Skandis wall panel! This model is free to use and distribute. It has been printed with a Prusa MK3S+ using…
No supports ,your go to ABS print settings. CB1: 4 M2.5X16mm socketcap screws 4 M3X12mm socket cap screws for the 4040 fan on the CB1 heatsink 4 M3 hex nuts 2.5mm thick 4010 Fans mount: 3 Hex standoffs 20mm 3 M3X16mm flathead screws 4 or…
This is the monthly project for subscribers at Printkits.com. You can find more information such as the full BOM right here: https://printkits.com/blogs/news/mantaray
My wife wanted some nice signs for her bookshelf so here is the collection. for the dual color writing, a change color command is necessary at layer 20. Depending on your printer, the legs might need to be glued or not. More signs on the…
Gridfinity Box for the IFixit Manta Precision Bit Set. The set fits stackable in the gridfinity box and has some additional small trays
Upgrade Your Kobra 2 Max with a Powerful Manta M5P Mainboard This custom-designed bracket allows you to seamlessly mount a BIGTREETECH Manta M5P control board inside the original electronics compartment of your Anycubic Kobra 2 Max. It's…
Redesigned to mount dual 60mm fans. I'm using GDSTime 60mm fans, which came with fan guards. You will need the standoffs and the din rail mounts from the original. Also fitted Nadir's SV08 feet to give enough clearance and airflow
Requires supports or splitting in the middle and then gluing parts together. I tried both options and the one with supports but without a seam looks better after adding finishing ornament with a 3D pen which also hides all the support…
For a bill of material and links to products used to make this check here: http://www.perpetualprinter.com/
BTT Manta M5P mount for Enderwire. (5) M5 x 10 screws w/ (5) M5 Spring nuts needed to mount to frame, (4) M3 heat inserts m3x4x5, and (4) M3 x 8mm hex screws.
This board can be mounted two ways with the original power supply. This is to add the Manta M8P board to the Sovol SV02 for better control and for klipper. I will be working on the fan attachment later for 5051 fans. you will have to use…
Mount to install a BTT Manta M8P to the default din rail clips of the Ender 3 NG. Uses M3x6 SHCS everywhere.
Printer - Original Prusa Mini Filament - PETG Color - Blue Filament Brand - OVERTURE Brim - Yes Raft - No
NOTE: BEFORE YOU ARE GOING DOWN THIS ROAD, MAKE SURE YOU KNOW WHAT YOU ARE DOING BEFORE SWAPPING STOCK BOARD. WARRANTY WILL BE VOIDED This is the mount for the Manta M8P or M5P to be used on the X Max3. BOM: 4x M3 dia4.5mm Heated inserts…
Print these instead of the default arms if you are using the Bigtreetech Manta M8P (V1.0, V1.1, V2.0)
The plate is available as Plain, with HevORT logo, with Voron logo, with VzBot logo and with Zero G logo. Zero G Logo shown in pictures. You can either print it the stl, makes it 3mm thick or use the dxf file to order a part cut in a…
I made this as a challenge to myself so I could finally go through with modeling as well as trying to make more things for my Multiboard system. This is my first model that I've design from scratch with the exception of the snaps on the…
Cooling Hood BigtreeTech Manta M8P v1.1 and v2.0 For CB1/CM4 with 60x60x15 Fan M8P. drivers with 5015 Blowerfan. And ziptie mountingpoints for esay wire wireing.
This is a fan mounting board for the BTT Manta M8P motherboard. It holds 2 - 60mm and 1 - 40mm fans.
Here are the parts I designed and 3d printed for my Fimi Manta rc FPV tiltrotor model. The left and right nacelles were printed in LW-PLA and attached using strips of coloured vinyl tape. They have good clearance around the servos and…
Bigtreetech Manta M4P mount on din rails for the Ender 3 NG 1.2 printer. Make use of the standard din rail mounts available in the Ender 3 NG project. It uses M3 screws, without brass insert, directly screwed into the plastic.
Printed it with ASA, Nozzle 0.4mm, Layer Height 0.2mm Can used together with the fan mount → https://www.printables.com/model/1100119-flat-btt-manta-m8p-120mm-dinrail-mount Changelog V2 increased screw tube stability and size a bit Love…
⌀4,22 mm holes for ⌀5mm M3 inserts. For completion i used M3x10 bolts and drilled rubber stoppers from rails as spacers.
Tried to preserve existing outer geometry. * Beta2 * Beta2 should be good enough to actually use the bottom, I'm still finalizing the lid. Changes since beta or features added: Exposed all ports - everything on the ethernet side, and all…
Electronics Enclosure for Sovol SV06/SV06 Plus Upgrade your Sovol SV06 or SV06 Plus with this custom electronics enclosure, designed for the BTT Manta M4P . This compact enclosure replaces the stock housing while using the original hinges…
A spring based flat mount for BigTreeTech Manta M8P boards on a Voron printer (or similar with DIN35 rails). Can used together with the fan mount → https://www.printables.com/model/1076080-btt-manta-m8p-120mm-fan-mount You also need 4x…
DE Mit dieser Transferplatte lässt sich der Manta MK2 Fan Duct an einer MGN12C Gleitschienenwagen, montieren. Der Anschlag für den x-Endstopp ist links. Ist noch ein Prototyp, der schon ein paar Betriebsstunden auf dem Buckel hat. Für die…
REMEBER TO MIRROR ON OF THE PARTS IF YOUR ARE DOWNLOADING THE STL FILES, i would recomend to mirror the part WHITOUT the iFixit logo. If the slot in the stand is to wide for your iFixit Manta kit i would using some electircal tape to…
I use this on my current setup. V2, made oval of the mounting holes to make tolerance. You need m3 heat set inserts.
Black Manta Helmet for Minimates This is meant as a replacement head rather than fitting over a Minimate head. Category: Toys & Games
I wanted to run mainline Klipper and use a Cartographer probe. This meant replacing the main board. I chose a BTT Manta M5P. Bootycall Jones had generously provided a mount for the new board and a model to mount the stock fan above the…
I've created an adapter for the BTT Manta E3EZ board, designed specifically for my Elegoo Neptune 2S printer. The adapter was made using OpenSCAD and is easily customizable for other printers or boards by modifying the constants defined…
Description This is the case for the Mantaray, an ergonomic mechanical keyboard I designed. The upgraded version of this project, the Mantaray Pro Wireless, is now available! You can pick one up either assembled , or as a kit . 3D files…
When viewing this sculpture, it seems to majestically glide past you. This manta ray is surely a special highlight on your desk or in your living room. Calmly and gently, it takes its place with its wings, undoubtedly drawing attention.…
I didn't liked most of the models for the manta kit, as they first take a lot of filament and second mostly don't fit my Prusa Mini. Also there was not really a model for the Essential Kit. As all iFixit hard shells (Essential, Manta and…
BE SURE TO HAVE ENOUGH FRESH AIRFLOW TO THE BLOWERS OR A WAY FOR THE HOT AIR TO SCAPE AFTER IT HIT THE DRIVERS, THEY WOULD OVERHEAT IF ENCASED WITH THE BLOWERS ONLY.…
Mount for Bigtreetech MANTA M5P for ELEGOO Neptune 3 Pro. Had to remove a little of the box plastic (See picture) to let the mounting screws fit. At this height the driver clear the bottom panel. Also include a mount for a buck converter…
Description Running drivers at higher currents causes them to become extremely hot. To ensure reliable operation, cooling is necessary. This fan case provides ample cooling for all 8 driver slots and has been tested with BTT TMC2209,…
Simple Caribou btt m8p case remix for mk3s. Freecad remix is a mess but its working.
I needed a Din mount for my Manta M8P that would span the rails rather than run along them. It was necessary to try and fit all the electronics in the bay for a Voron 250. Every mount I've come across is designed to run along the rails so…
Note print this in a food safe plastic. PETG will work for a one time use (bacteria could grow if you use this print over time rather than in one sitting). Its a 3.4in diameter cutter. 0.2mm height. 100% infill. Not the chamfered edge on…
Remixed to fit my Voron 2.4 250 mm with 2x TMC5160T Plus and Manta M8P V2.0 board.
About A simple yet secure Honeycomb Storage Wall holder for the iFixit Manta Driver Bit Set . The original design was based on the iFixit Wall Mount (Thingiverse) by TinkerLifeProjects . Remixed to fit a Mako Driver Set on an Ikea Skadis…
Print in TPU, Some tolerance in capacitor slot to use with heat shrink tube
Skadis Interlock Mounting System printables.com/model/1204958-skadis-interlock-a-ikea-skadis-mounting-system
A quick remix to convert to MultiConnect mounting on Multiboard
Added heat-set insert holes for ADXL345, same inserts as the original model
