Manta M4P Ender 3 Pro Rear Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Case for the Manta M4P I've been working on
- Ocena
- 5 / 5
- Polubienia
- 50
- Pobrania
- 513
- Wydruki
- 2
- Wyświetlenia
- 2866
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is intended for the Ender 3 Pro, but will probably work fine on other printers with minor tweaking.
My goal was to keep most of the ports accessible.
The internal USB one may be usable with a 90-degree USB cable.
Ferrule connectors aren't required at all, but it's more of an overall safety thing.
A SD Card Extension cable is recommended; you can still access the port it just may be annoying.
The 60MM fan will have to be mounted after the lid is on.
Things I used
SD Card Mount + 2 in 1 Micro SD to SD/Micro SD Card Extension Cable
WINSINN DC 60mm Fan 24V 6010
Waveshare Compatible Antenna
Ferrule Crimping Tool Kit
M3x4 Screws for mounting motherboard
M5x16 screws for fan
Just some random mesh for the fan.
feet to rise to printer a bit, any will do but I used these.
Print settings:
Layer height: 0.2
Infill: 20%
Supports: none