Big Tree Tech Manta M5P Case V0.2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BTT Manta M5P housing for 2040 extrusion mounting.
- Ocena
- 5 / 5
- Polubienia
- 61
- Pobrania
- 563
- Wydruki
- 1
- Wyświetlenia
- 2275
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v2.0
After receiving my BTT Manta board I decided to design a better version that was also more printer friendly.
In this design the board floats in the middle of the body with two lids for access on both sides.
I have also added cable retention points that can be snipped after printing.
All mounting points will use m3 4 x 5mm heat inserts.
I have added mouse ears on the models that can be cut off to help prevent warping during prints .
Print Lid & Base upside down.
Will print and add pictures ASAP.
Again thanks to Speedysk1 for his model
https://www.printables.com/model/390639-bigtreetech-manta-m5p-model
Update: modified the Body file to have larger mounting points for the M5P.
Also added some support braces.
Added an extended height models to incorporate the fan above the stepper drivers. (let me know if it fit as i still haven't printed it )
Added Extra models with 12mm hole for umbilical.