82 modeli
After receiving my BTT Manta board I decided to design a better version that was also more printer friendly. In this design the board floats in the middle of the body with two lids for access on both sides. I have also added cable…
Update 03/07/2023 - Shortened the small piece by 4.5mm - an error cause by me misreading the documentation. Long side measures distance between holes, short side measures distance between edge and hole:…
You need: 4 m3 brass inserts and m2 x 10 self tapping screws
Rendered stl model from BTT step file. Uploading for convenience for others. I used this to make https://www.thingiverse.com/thing:5836590 One is the full high resolution stl with all the parts. One is a low resolution model perfect for…
Added some standoffs in the Manta E3EZ patern, but that model is a ‘beta’, haven't printed it yet (but the standoffs are properly positioned for the E3EZ's mounting holes). Side case for the M5P Manta board on a X5SA printer. I used a 2nd…
Gehäuse für das BTT Manta M5P-Board. Im Deckel ist Platz für zwei 40mm Lüfter für die Stepperdriver und ein 60mm Lüfter für das CM4/CB1 Modul. In die 4mm Löcher zur Verschraubung des Boards und des Deckels kommen M3 Gewindeeinsätze. Ich…
This is a hard mount that fits the BigTreeTech Manta M5P control board. It include a fan duck for the stepper drivers Link for the CB1 Heatsink Fan Mount https://www.printables.com/model/464794-cb1-heatsink-fan-mount Code to have the fan…
Infill for Manta M5P holder: 30-50% Infil for DIN rail clips: 10-15% No print cooling for DIN rail clips Material: PETG Happy Printing!
Wanted to use this low-profile DIN clips https://www.printables.com/model/498818-low-profile-din-rail-bracket-for-v02 because of height troubles with voron DIN clips. They also seem to hold better. But found that holes has different…
Printed in PETG - Fans must be 24V to match VBB of Manta m5p - Intake fan is 40x40x10mm - Lid fan is 80x80mm - M3 bolts/inserts I used these threaded inserts -…
Mount is for the BigTreeTech Manta M5P. Refer to Ender 3 NG documentation or discord for further information. Use 2 of Ender 3 NG Beta ENG-DIN1_b.stl
BigTreeTech Manta M5P case with 120mm fan mount. Screw holes sized for threading directly. No heat-set inserts required. 4x M3x10 for the lid 4x M3x4 for the board 4x M5x10 case fan screws 1x 120mmx25mm(or less) fan.
Manta M5P + CB1 Case Box for Prusa Bear Upgrade designed by a friend.
This is a remix of https://www.printables.com/model/426252-big-tree-tech-manta-m5p-case-v02 by Raziel's M5P controller box for the BTT Manta M5P MCU. I added the stock mounting bracket holes to the main box and increased the top umbilical…
Remix of the ZeroG DIN mount (base is Octopus) to fit a BTT Manta M5P BOM 4* M3 heatset inserts 4* M3x6 or M3x8 screws (BHCS or SHCS) Printing settings Would recommend using ABS or PETG to allow the part to flex without breaking. Some…
BTT Manta M5P mount for Enderwire. (5) M5 x 10 screws w/ (5) M5 Spring nuts needed to mount to frame, (4) M3 heat inserts m3x4x5, and (4) M3 x 8mm hex screws.
A mount for the BTT Manta M5P board
When I set out to find a replacement for the stock board for my Ender 5 Plus to run Klipper, I ended up deciding that the Big Tree Tech Manta M5P with their CB1 RPi replacement was the most cost effective and had the right features.…
Created a case for my new BTT M5P based on https://www.thingiverse.com/thing:4916320 . I'm only using one set of rails and I added holes in the back for easier cord/wire/cable management. Manta screws down with 4 M3 screws Use any lid…
A mount for the BTT Manta M5P. Didnt found a solution I liked so I made my own. Fits for the Fysetc V0 kit and the predrilled holes in the back panel.
A mount for the Big Tree Tech (BTT) Manta M5P for the Voron 0.1 Attached using VHB tape. 4 off M3 6mm screws go directly into the plastic (not threaded).
Voron Enderwire Manta M5P for rear middle and right grill with pass through for RJ45, USB, etc.
NOTE: This is meant for the K1 Max. If you are upgrading a K1/K1C use the other mount from Bootycalljones (linked below) Are you tired of running out of RAM? is your printer hanging up, or even worse, crashing? Maybe you'd like to upgrade…
Mount for Voron V0.2 and a Manta M5P
I modified the original mounting bracket model from Sovol for the Sv06 to allow the mount of the BTT M5P mcu box created by Raziel. I took the stock bracket and extended it 13mm to clear the top of the box. I could not put the mounting…
This mount is used to adapt the Manta M5P board to the CR-10 Factory board mount location. I have added a trim piece for the IO as well. designed to be printed solid. Needed: 4x 3Mx5 bolts
I wanted to run mainline Klipper and use a Cartographer probe. This meant replacing the main board. I chose a BTT Manta M5P. Bootycall Jones had generously provided a mount for the new board and a model to mount the stock fan above the…
Lid made for a 92mm fan, specifically NF-A9x14, for the BTT M5p box that @Raziel_163191 designed This was request from one of my patrons Haven't tested it, but I made two models, one with the original thickness, and a second with a 5mm…
Back wall housing for Manta M5P on Sapphire Plus I decided to put it on the back of the printer to be able to reach BOOT and RESET buttons. CB1 is cooled with 4010 fan, box with 4020 fan. 2 slots for bulk converters at the bottom. Enough…
Open Mesh OM5P radio mount for FIRST Robotics Competition. Features cable management for barrel or POE cable. Print with PETG, ABS or CF-Nylon. 4 perimeters. No supports needed.
Print in ASA with the usual Voron settings, you'll need 4x m3 standoffs of a suitable length. Step file included in case you want to edit it.
Changed the hole sizes to 2.5mm for use with m3 screws without heated nut inserts
BE SURE TO HAVE ENOUGH FRESH AIRFLOW TO THE BLOWERS OR A WAY FOR THE HOT AIR TO SCAPE AFTER IT HIT THE DRIVERS, THEY WOULD OVERHEAT IF ENCASED WITH THE BLOWERS ONLY.…
This is still a Work in Progress, i think this will be ok, but i have to wait until i receive some more "candys" for my SWX2 to test it. I am gonna have even a hole in the SWX2 so i can attach usb and hdmi wires directly to the manta,…
BigTreeTech Manta M5P - Mount for Ender-6
https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the BIBO bed. It is too wide for the other two positions. I have created a smaller version to fit the right-front corner…
I used 30% infill with organic supports. 0.20mm speed.
This is a two piece mount designed for the Voron 0.2 to hold the BigTreeTech Manta M5P Main Board. I use the Voron Nightwatch Bowden style extruder in my build so I created this mount to offset the board so I can fit both the extruder and…
NOTE: BEFORE YOU ARE GOING DOWN THIS ROAD, MAKE SURE YOU KNOW WHAT YOU ARE DOING BEFORE SWAPPING STOCK BOARD. WARRANTY WILL BE VOIDED This is the mount for the Manta M8P or M5P to be used on the X Max3. BOM: 4x M3 dia4.5mm Heated inserts…
This is an enclosure I designed to fit a BTT Manta M5P for Sovol SV06 or SV06 Plus. I have both printers and it fits both. This fits into the same quick-connect brackets that the stock electronics box uses. The printer with all the green…
Spacer to align eddy on original screw for stock inductive sensor. Use with skinny eddy. Use with any version of BTT EDDY with EDDY-NG. Spacing from bed is just right :-). You can use with stock THR via USB, unfortunatly my THR fall apart…
This design is inspired by I completely remade this, because I wanted better printability with less bridging and a different fan mount direction. One of the fans is flipped, so that hot air from above the MCU is expelled. I also wanted to…
A simple protective case for M5Paper with cut-outs for all the connectors. Guide for putting the case on and off:
Having switched to a Manta M5P to control my custom Bear2.1 build, needed to design a new case for it. Set out that I wanted to retain access to all the IO ports externally, use clamped cable guides, and have a door for easy access. And…
Why Make the Switch? 🤔 1. No More External Raspberry Pi! 🥳 - With the BTT Manta M5P, you get the power of a Raspberry Pi *built right in*. No more external boards cluttering up your setup—everything is clean and streamlined. 2.…
I use this on my current setup. V2, made oval of the mounting holes to make tolerance. You need m3 heat set inserts.
I have recently decided to upgrade my JGAurora A5 printer to Klipper. For this I needed a new mainboard and ended up with the BTT Manta M5P. To mount it I had to create an adaptor plate, I can now screw the plate into the original…
I took the great model by Mpbiv421 and redrawn it so that it now fits the BTT M5P. I hope you enjoy it.
Upgrade Your Kobra 2 Max with a Powerful Manta M5P Mainboard This custom-designed bracket allows you to seamlessly mount a BIGTREETECH Manta M5P control board inside the original electronics compartment of your Anycubic Kobra 2 Max. It's…
Tried to preserve existing outer geometry. Final (probably) This will be the one I have installed on my V-Minion. I'm not putting them in a folder, they will be at the top level of files. All beta2 things wanted below completed (I think)…
Moved screw-posts and changed cover to accommodate added heat sink height
Mount for Bigtreetech MANTA M5P for ELEGOO Neptune 3 Pro. Had to remove a little of the box plastic (See picture) to let the mounting screws fit. At this height the driver clear the bottom panel. Also include a mount for a buck converter…
use M3 5mm heat set inserts: https://s.click.aliexpress.com/e/_DFtyB6n Print Settings Printer brand: Artillery Printer: Artillery Sidewinder X2 Supports: Yes Notes: use supports for the zip-ties bridge make sure that part is printed…
Simple quick and dirty electronic box I designed for the Manta M5P to fit in my Kappy printer via the side 2020 extrusions. Needs voron heatset inserts for the board mounting points and cover. Fit the 3010 fan with simple M3 screws and…
Voron 0.1/0.2 BTT Manta M5P mount.
I took inspiration from @Solid3D_676108 housing, I like the general style but needed to modify things for my needs. Specifically I was using 5010 fans and needed to be able to mount it on the side of the printer using m5 bolts and t-slot…
The mount for the BTT Manta M5P in the mounts repository is an early design style, and I wanted something that looked more like the newer mounts (and some of the other EMS mounts I've published), so I made this one from scratch using the…
Here is a high-quality, SEO-optimized product description tailored for Printables. It uses strong keywords to make sure Ender 3 and BigTreeTech Manta upgrades can find it easily, while keeping the layout clean and readable. BigTreeTech…
Hello, I needed a mount piece for my Manta M5P board when converting my good old MK3S+ to a Prusawire. Unfortunately I did not found such a mount. So I created one for myself. This is an alternative if not using the original Einsy board…
This mod allows the lid (Remix of Big Tree Tech Manta M5P Case V0.2 - Lid for 92mmx14 fan) , when used with the BTT Manta M5P V0.2 Internal Fans_12mm Hole or BTT Manta M5P Body V0.2 Fans Inside (either BTT Manta M5P V0.2 Internal Fan…
This design is inspired by I completely remade this, because I wanted better printability with less bridging and a different fan mount direction. One of the fans is flipped, so that hot air from above the MCU is expelled. I also wanted to…
I took the great model by Mpbiv421 and redrawn it so that it now fits the BTT M5P. I hope you enjoy it.
Upgrade Your Kobra 2 Max with a Powerful Manta M5P Mainboard This custom-designed bracket allows you to seamlessly mount a BIGTREETECH Manta M5P control board inside the original electronics compartment of your Anycubic Kobra 2 Max. It's…
BTT Manta M5P mount for Enderwire. (5) M5 x 10 screws w/ (5) M5 Spring nuts needed to mount to frame, (4) M3 heat inserts m3x4x5, and (4) M3 x 8mm hex screws.
The STL contains the entire box, including all individual parts. Then simply separate it into objects in the slicer. There are two 8mm spacers at the bottom. The flat plate at the very bottom serves as a drilling template. The large base…
Mid plate to mount BTT Manta M5P, Requires 4 x M3 heat set inserts
Slightly taller Support legs, to match the Mercury Zero Hydra Electronics Bay rubber feet bought off AliExpress
I needed a mount for the Manta M5P inside the Sidewinder X1 for my conversion to a Voron Switchwire. There is a massiv one on Thingiverse, but I wanted a slimmer version so I made my own. It mounts in place of the MKS Gen L v1. Use Voron…
I replaced my original mainboard with an M5P, but ran into issues fitting my BTT HDMI5 because of the tight space around the Micro HDMI port. I designed this mount and printed it in PETG without supports. I used M3 heat inserts on the…
This model is designed for installing the Manta M5P motherboard in the Voron 0.2 printer. It elevates the board for convenient installation and cable routing underneath the motherboard, as well as more attractive and easier cable…
⚠ Important Note This model is designed for the M5Paper , NOT for the M5PaperS3 . (I don’t own an M5PaperS3, so I haven’t been able to test or design for it.) This is a simple DIN-rail mounting bracket for the M5Paper . Print two copies…
These are the brackets to mount a Manta M5P to the rail clips used in the recent Voron releases. Two brackets are separate and use two rail clips. The model was redesigned from scratch using the inspiration from other mounts for BTT…
** I've ended up stopping work on this design (it should still print and work fine, just no further updates) in order to work on another design I liked better. New design is here:…
My Attempt at making a case for the BTT M5P Case for my Prusa Bear Printer, Has 2 x 40mm fan mount points, I think they will fit inside but if not outside is good too. Mounts onto 2040 extrusion. Not printed yet. Newer Version:…
Designed originally for the Voron 0 series, but I don't see why this can't be used for other printers. You can apply VHB tape directly to the back of the mount and forgo the DIN cleats + clips (might be better since there are tolerance…
M5Paper stand remixed from wall-mount version (angle back, add back support, remove holes) from https://www.thingiverse.com/thing:4767014 Code borrowed from wizche (worked perfectly first time). Suitable for tabletop / desktop / bedside…
This is a bracket for the BTT Manta M5P Case here: https://www.thingiverse.com/thing:6233360 Still a work in progress Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Infill: 25 Filament: Overture PETG…
Uses the stock mounting points and converts them for a BTT Manta M5P Board. Also moves the Bed Mosfet down out of the way. Fusion 360 file included for remixing, please link if you do.
