1 / 3
Big Tree Tech Manta M5P Case V0.2 - Lid for 92mmx14 fan — zdjęcie 1
1 / 3

Big Tree Tech Manta M5P Case V0.2 - Lid for 92mmx14 fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lid for the BTT M5p box that @Raziel_163191 designed but for a 92mm fan

Ocena
5 / 5
Polubienia
10
Pobrania
42
Wydruki
1
Wyświetlenia
393
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Lid made for a 92mm fan, specifically NF-A9x14, for the BTT M5p box that @Raziel_163191 designed

This was request from one of my patrons
Haven't tested it, but I made two models, one with the original thickness, and a second with a 5mm ledge possibly needed to compensate for the extra thickness of the noctua 14mm thick fan. (I assume the model was initially meant for 10mm thick fans)

edit: fan mounting holes were off, now fixed

------

Support me on Patreon !

https://patreon.com/squirrelf3d

or buy me a coffee
https://ko-fi.com/squirrelf3d
https://www.buymeacoffee.com/squirrelf


 

Tagi