BIGTREETECH Manta M5P case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made a case for the manta M5P board from BTT. Two 5010 fan locations
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I took inspiration from @Solid3D_676108 housing, I like the general style but needed to modify things for my needs. Specifically I was using 5010 fans and needed to be able to mount it on the side of the printer using m5 bolts and t-slot nuts. I also wanted to extend my front t-slot to add a display that needed to be farther to the right to miss the bed leveling screw of my printer. Printer mounts to m3 heat set nuts and 5mm m5 risers to align all the inputs.
Hardware needed
Needed Hardware
M5 t-slot nut x2
M5 10mm bolt x2
M3 6mm bolt x8
m5 5mm heat set insert x8
BTT manta m5p
BTT CB1 or other RPi compatible compute module
5010 fans x2
m3 12mm bolts x8
m3 nuts x8
I am including the onshape link: https://cad.onshape.com/documents/857ec5b4607469ffa95f3498/w/40d9425434dc046f13445873/e/35faf5b8679cf950f8757360
Modification: the CRtouch and Hotend fan cables were a little short, and I didn't want to spend more time making new ones so i routed them through a hole I drilled on the top, this hole is not in the original file