Sovol SV06 BTT Manta M5P controller adapted frame bracket mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I took the open source file for the Controller mounting bracket fror the Sovol SV06 to mount BTT Manta M5P controller
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 526
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I modified the original mounting bracket model from Sovol for the Sv06 to allow the mount of the BTT M5P mcu box created by Raziel. I took the stock bracket and extended it 13mm to clear the top of the box. I could not put the mounting holes on the controller box higher as there is a corner section that would need to be drastically cut out to allow the brackets to stick into place. Adjusting the bracket made more sense. The fit is wonderful. Print it mounting hooks up, .2 layer height with supports, you can opt to leave the supports in tacked under the model except for the two bracket hooks that need to latch onto the controller box. You reuse the existing “space shuttle” locking knob, just unscrews from the back…
For use on this modified model =)
https://www.printables.com/model/482104-sovol-sv06-btt-manta-m5p-controller-box-remix