Ender3 Pro Manta M5P Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a printable mod for an Ender3 so that you can add a Manta M5P to it.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Here is a high-quality, SEO-optimized product description tailored for Printables. It uses strong keywords to make sure Ender 3 and BigTreeTech Manta upgrades can find it easily, while keeping the layout clean and readable.
BigTreeTech Manta M5P Upgrade Case for Ender 3 Pro
Upgrade your Ender 3 Pro with this custom-designed enclosure built specifically for the BigTreeTech Manta M5P mainboard (perfect for running Klipper with a CB1/CM4 module!). This design replaces the cramped stock electronics box, giving you a spacious, functional, and easily accessible home for your upgraded mainboard.
Whether you are converting your Ender 3 Pro to Klipper or just looking for a cleaner electronics setup, this case is engineered to make installation and maintenance a breeze.
Key Design Features
Sliding Lid Design: No more fumbling with tiny screws just to check your wiring. The secure sliding lid grants effortless, tool-free access to your Manta M5P board whenever you need to adjust stepper drivers, plug in USB cables, or check status LEDs.
Integrated 40mm Fan Mount: Keep your stepper drivers and CB1/CM4 computing module ice-cold. The dedicated 40mm fan mount provides targeted cooling right over the high-heat areas of the board.
Extra Clearance Standoffs: Designed with integrated riser standoffs to slightly lift the enclosure. This provides crucial extra clearance underneath the printer frame, allowing for improved under-bed airflow and cleaner external cable routing.
Perfect Port Alignment: All essential ports, including USB, Ethernet, and MicroSD card slots, are fully accessible without compromising the protection of the internal electronics.
Print Settings & Recommendations
To ensure maximum durability and a perfect fit for the sliding lid mechanism, use the following print guidelines:
Material: PETG or ABS/ASA is highly recommended due to the ambient heat generated by the stepper drivers and heated bed. High-temp PLA Plus can work if your printer is well-ventilated.
Infill: 20% to 25% (Gyroid or Grid for structural rigidity).
Wall Loops / Perimeters: 3 walls for solid screw-holding strength.
Supports: Minimal. The main body prints flat. The sliding lid slots may require touching-buildplate supports depending on how well your printer handles bridging.
Hardware Required
Fan: 1x 40mm cooling fan (4010 or 4020, 12V/24V depending on your setup).
Board Mounting: M3 button-head screws to secure the Manta M5P to the internal printed standoffs.
Frame Mounting: Standard M3/M4 T-nuts and screws to clamp the case/standoffs to the Ender 3 Pro's 2020/2040 aluminum extrusions.