Search results: manta

Counting matching models…

Printables

Manta M8P Mounting Arms for Bastion Printer

Print these instead of the default arms if you are using the Bigtreetech Manta M8P (V1.0, V1.1, V2.0)

Order a print of this model

Printables

Voron V0.2 BTT Manta M5P Mount

Mount for Voron V0.2 and a Manta M5P

Order a print of this model

Printables

Accessories for the Fimi Manta

Here are the parts I designed and 3d printed for my Fimi Manta rc FPV tiltrotor model. The left and right nacelles were printed in LW-PLA and attached using strips of coloured vinyl tape. They have good clearance around the servos and…

Order a print of this model

Printables

Fimi Manta Caddx Camera Support

This support fits perfectly, leaving the camera centered on the drone, I screwed it in and put a little glue on the sides for better fixation. You may need to widen the hole a little with a small drill or your own wrench or screw. Esse…

Order a print of this model

Printables

Ghost Manta Original Logo

Original ghost manta logo.

Order a print of this model

Printables

Opel Manta 3D Printable Model

This detailed 3D model features the iconic Opel Manta in a sporty drift-tuned style, complete with wide fenders, aggressive body kit, and dual exhaust pipes. Perfect for car and tuning enthusiasts! Ideal as a decorative piece,…

Order a print of this model

Printables

Fimi Manta Caddx Avatar GT Support

Fiz esse suporte para colocar o vtx por dentro do fimi manta para melhorar a aerodinâmica , mas tem que colocar o suporte da bateria mais para atras ao depender do tamanho/tipo de bateria , fiz também entrada de ar frontais (como na foto)…

Order a print of this model

Printables

Fimi Manta GPS support

Fimi Manta GPS support for original module

Order a print of this model

Printables

Low Poly Manta Ray

Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…

Order a print of this model

Printables

BTT Manta M5P Stepper Fan Mount

This design is inspired by I completely remade this, because I wanted better printability with less bridging and a different fan mount direction. One of the fans is flipped, so that hot air from above the MCU is expelled. I also wanted to…

Order a print of this model

Printables

Manta M8P 4-Slot TMC2209 Heatsink Alignment Jig

This jig is designed for the perfectionist. Specifically tailored for BigTreeTech TMC2209 modules , this tool allows you to align and seat four heatsinks simultaneously with surgical precision. Whether you are fully populating a Manta M8P…

Order a print of this model

Printables

Manta Elastic Shell Retention (Nerf Shell Holder)

Only requires 4mm elastic for retention. Design includes several elastic stringing options to fit different shell types. Mount to a tactical belt or build your own bandolier with 2 inch strap https://a.co/d/0bb5H35k Swap filament when…

Order a print of this model

Printables

BTT Manta M5P Voron 0.2 mount with M3 Screws

Voron 0.1/0.2 BTT Manta M5P mount.

Order a print of this model

Printables

BTT Manta M8P V2.0 Cooling 4 Fan Plate

BTT Manta M8P V2.0 Cooling 4 Fan Plate 4x DIN912 M3x35mm 4x DIN912 M3x12mm for every fan If printed from ABS please set size on X and Y to 101% for reduce shrinkage and nice fit.

Order a print of this model

Printables

BTT Manta M8p fan mount

Manta m8p fans mount fir 2 5010 fans for drivers and a 4010 fan for the CB.

Order a print of this model

Printables

Romantasy Quote Box

I wanted a box with a quote from Rebecca Yarrow's book, Fourth Wing for my desk to keep pens and such in.

Order a print of this model

Printables

Qidi X-Plus3 BTT Manta M4P adapter bracket

My stock control board got zapped, had a Manta M4P lying around and did not want to pay $200 for a new board. I will upload printer config files and guide once I fully finish the conversion. Should be compatible with the X-Max3 and…

Order a print of this model

Printables

BTT MANTA E3EZ DIN RAIL MOUNT AND FAN MOUNTS

MANTA E3EZ DIN RAIL MOUNT AND 2 FAN MOUNTS . MY EZ2209 DRIVERS HEATSINKS HAVE HORIZONTAL FINS HENCE THE DESIGN. IF SOMEONE HAS VERTICAL FINS SEND ME A DM MAYBE I CAN DO SOMETHING. These are some of the parts : 4 M3 Brass Heated Inserts 4…

Order a print of this model

Printables

BTT Manta5P (M5P) Mount for Voron V0.1/V0.2

I took the great model by Mpbiv421 and redrawn it so that it now fits the BTT M5P. I hope you enjoy it.

Order a print of this model

Printables

Articulated Manta Ray

Check out my Patreon or my Printables club for more awesome models and benefits! Meet the Articulated Manta Ray! It prints in place, articulates right off the buildplate, and no assembly or post processing is required. You can choose…

Order a print of this model

Printables

Ender 3 Top Cover for Manta E3 EZ

I was looking for a mount for the Manta E3 EZ. Biqu published one that I liked, but it didn't allow for threaded inserts, so I created my own. My OnShape CAD is published here…

Order a print of this model

Printables

Skandis Wall Mount for iFixit Manta

Skandis Wall Mount for iFixit Manta This adapter allows to mount the iFixit Manta Precision Bit Set including the cover to a IKEA Skandis wall panel! This model is free to use and distribute. It has been printed with a Prusa MK3S+ using…

Order a print of this model

Printables

BTT MANTA MP8 fan mounts for CB1 and stepper drivers

No supports ,your go to ABS print settings. CB1: 4 M2.5X16mm socketcap screws 4 M3X12mm socket cap screws for the 4040 fan on the CB1 heatsink 4 M3 hex nuts 2.5mm thick 4010 Fans mount: 3 Hex standoffs 20mm 3 M3X16mm flathead screws 4 or…

Order a print of this model

Printables

Animantarx

Nodosaur from early Cretaceous North America.

Order a print of this model

Printables

Manta Ray Kinetic Sculpture Automata

This is the monthly project for subscribers at Printkits.com. You can find more information such as the full BOM right here: https://printkits.com/blogs/news/mantaray

Order a print of this model

Printables

SMUT | Romantasy | Fantasy | Sci-Fi | Thriller Book signs

My wife wanted some nice signs for her bookshelf so here is the collection. for the dual color writing, a change color command is necessary at layer 20. Depending on your printer, the legs might need to be glued or not. More signs on the…

Order a print of this model

Printables

IFixit Manta Precision Bit Set Gridfinity Box

Gridfinity Box for the IFixit Manta Precision Bit Set. The set fits stackable in the gridfinity box and has some additional small trays

Order a print of this model

Printables

Anycubic Kobra 2 Max – Manta M5P Controller Board Mount

Upgrade Your Kobra 2 Max with a Powerful Manta M5P Mainboard This custom-designed bracket allows you to seamlessly mount a BIGTREETECH Manta M5P control board inside the original electronics compartment of your Anycubic Kobra 2 Max. It's…

Order a print of this model

Printables

Roblox Jailbreak (Manta)

Manta from roblox jailbreak

Order a print of this model

Printables

BTT Manta M8P Dual 60mm fanplate

Redesigned to mount dual 60mm fans. I'm using GDSTime 60mm fans, which came with fan guards. You will need the standoffs and the din rail mounts from the original. Also fitted Nadir's SV08 feet to give enough clearance and airflow

Order a print of this model

Printables

Manta from the game "Sky: Children of the Light"

Requires supports or splitting in the middle and then gluing parts together. I tried both options and the one with supports but without a seam looks better after adding finishing ornament with a 3D pen which also hides all the support…

Order a print of this model

Printables

Manta M8P Faceplate

For a bill of material and links to products used to make this check here: http://www.perpetualprinter.com/

Order a print of this model

Printables

BTT Manta M5P Voron Switchwire Enderwire Mount

BTT Manta M5P mount for Enderwire. (5) M5 x 10 screws w/ (5) M5 Spring nuts needed to mount to frame, (4) M3 heat inserts m3x4x5, and (4) M3 x 8mm hex screws.

Order a print of this model

Printables

SV02 controller board mounting for Manta M8P

This board can be mounted two ways with the original power supply. This is to add the Manta M8P board to the Sovol SV02 for better control and for klipper. I will be working on the fan attachment later for 5051 fans. you will have to use…

Order a print of this model

Printables

BTT Manta M8P Mount for Ender 3 NG

Mount to install a BTT Manta M8P to the default din rail clips of the Ender 3 NG. Uses M3x6 SHCS everywhere.

Order a print of this model

Printables

Manta FIMI RC Plane FC base plate

Order a print of this model

Printables

Manta Ray

Printer - Original Prusa Mini Filament - PETG Color - Blue Filament Brand - OVERTURE Brim - Yes Raft - No

Order a print of this model

Printables

Manta M8P/M5P Mount for XMax3

NOTE: BEFORE YOU ARE GOING DOWN THIS ROAD, MAKE SURE YOU KNOW WHAT YOU ARE DOING BEFORE SWAPPING STOCK BOARD. WARRANTY WILL BE VOIDED This is the mount for the Manta M8P or M5P to be used on the X Max3. BOM: 4x M3 dia4.5mm Heated inserts…

Order a print of this model

Printables

Manta M8P Mounting Arms for Bastion Printer

Print these instead of the default arms if you are using the Bigtreetech Manta M8P (V1.0, V1.1, V2.0)

Order a print of this model

Printables

iFixit Manta Kit Multiboard Mount

I made this as a challenge to myself so I could finally go through with modeling as well as trying to make more things for my Multiboard system. This is my second model that I've design from scratch with the exception of the snaps on the…

Order a print of this model

Printables

BTT Manta M8P Cooling Fan Plate

The plate is available as Plain, with HevORT logo, with Voron logo, with VzBot logo and with Zero G logo. Zero G Logo shown in pictures. You can either print it the stl, makes it 3mm thick or use the dxf file to order a part cut in a…

Order a print of this model

Printables

iFixit Manta Kit w/ Hinge Multiboard Mount

I made this as a challenge to myself so I could finally go through with modeling as well as trying to make more things for my Multiboard system. This is my first model that I've design from scratch with the exception of the snaps on the…

Order a print of this model

Printables

BigtreeTech Manta M8P v1.1 + v2.0 Airduct With CB1/CM4

Cooling Hood BigtreeTech Manta M8P v1.1 and v2.0 For CB1/CM4 with 60x60x15 Fan M8P. drivers with 5015 Blowerfan. And ziptie mountingpoints for esay wire wireing.

Order a print of this model

Printables

Voron V0.2 BTT Manta M5P Mount

Mount for Voron V0.2 and a Manta M5P

Order a print of this model

Printables

Fan Mount for BTT Manta M8P

This is a fan mounting board for the BTT Manta M8P motherboard. It holds 2 - 60mm and 1 - 40mm fans.

Order a print of this model

Printables

Accessories for the Fimi Manta

Order a print of this model

Printables

Manta M8P Mounts

Mounts for Manta M8P, Use M3x8mm screws to mount the board.

Order a print of this model

Printables

BTT Manta M4P mount for Ender3 NG1.2

Bigtreetech Manta M4P mount on din rails for the Ender 3 NG 1.2 printer. Make use of the standard din rail mounts available in the Ender 3 NG project. It uses M3 screws, without brass insert, directly screwed into the plastic.

Order a print of this model

Printables

"Manta" AR for Dummy13

An AR I drew quickly and turned into 3d with Blender. Inspired by Gundam. Print it upside down please.

Order a print of this model

Printables

BigTreeTech Manta M5P - Mount for Ender-6

Order a print of this model

Printables

E3NG Manta M5P Mount

A mount for the BTT Manta M5P board

Order a print of this model

Printables

BTT Manta M8P 120mm Fan Mount

Printed it with ASA, Nozzle 0.4mm, Layer Height 0.2mm Can used together with the fan mount → https://www.printables.com/model/1100119-flat-btt-manta-m8p-120mm-dinrail-mount Changelog V2 increased screw tube stability and size a bit Love…

Order a print of this model

Printables

Mantaflow Ornament Cube

Best to print with supports on baseplate only.

Order a print of this model

Printables

Mantaflow Ornament Sphere

Best to print with supports on baseplate only.

Order a print of this model

Printables

BTT Manta M8P v2.0 low height dinrail mount for M3 inserts

⌀4,22 mm holes for ⌀5mm M3 inserts. For completion i used M3x10 bolts and drilled rubber stoppers from rails as spacers.

Order a print of this model

Printables

RatRig V-Minion 1.1 Electronics Box for BTT Manta M5P

Tried to preserve existing outer geometry. * Beta2 * Beta2 should be good enough to actually use the bottom, I'm still finalizing the lid. Changes since beta or features added: Exposed all ports - everything on the ethernet side, and all…

Order a print of this model

Printables

BTT Manta M4P for Sovol SV06 and SV06 Plus on Steroids

Electronics Enclosure for Sovol SV06/SV06 Plus Upgrade your Sovol SV06 or SV06 Plus with this custom electronics enclosure, designed for the BTT Manta M4P . This compact enclosure replaces the stock housing while using the original hinges…

Order a print of this model

Printables

Fimi Manta Caddx Avatar GT

Order a print of this model

Printables

Flat BTT Manta M8P DinRail Mount

A spring based flat mount for BigTreeTech Manta M8P boards on a Voron printer (or similar with DIN35 rails). Can used together with the fan mount → https://www.printables.com/model/1076080-btt-manta-m8p-120mm-fan-mount You also need 4x…

Order a print of this model

Printables

Transferplatte Manta MK2 Fan Duct und MGN12C Gleitwagen

DE Mit dieser Transferplatte lässt sich der Manta MK2 Fan Duct an einer MGN12C Gleitschienenwagen, montieren. Der Anschlag für den x-Endstopp ist links. Ist noch ein Prototyp, der schon ein paar Betriebsstunden auf dem Buckel hat. Für die…

Order a print of this model

Printables

Fimi Manta Caddx Camera Support

Order a print of this model

Printables

iFixit Manta stand (A1 MINI)

REMEBER TO MIRROR ON OF THE PARTS IF YOUR ARE DOWNLOADING THE STL FILES, i would recomend to mirror the part WHITOUT the iFixit logo. If the slot in the stand is to wide for your iFixit Manta kit i would using some electircal tape to…

Order a print of this model

Printables

Comgrow T300 Manta M5P mount

I use this on my current setup. V2, made oval of the mounting holes to make tolerance. You need m3 heat set inserts.

Order a print of this model

Printables

Black Manta Helmet for Minimates - includes SCAD file

Black Manta Helmet for Minimates This is meant as a replacement head rather than fitting over a Minimate head. Category: Toys & Games

Order a print of this model

Printables

klixx mantaray

no suports nedeed (or yes)

Order a print of this model

Printables

K1 Manta M5P fan mount and skirt

I wanted to run mainline Klipper and use a Cartographer probe. This meant replacing the main board. I chose a BTT Manta M5P. Bootycall Jones had generously provided a mount for the new board and a model to mount the stock fan above the…

Order a print of this model

Printables

iFixit Manta Precision Driver Holder - 1u GridFinity Refined

This is a holder for the iFixit Manta Precision Driver, which will give you a 1u bin to securely store your driver while still allowing it to be easily grabbed with one hand. I designed it to sit in front of the iFixit Manta driver kit,…

Order a print of this model

Printables

Neptune 2 BTT mantaE3EZ screw adapter/mount

I've created an adapter for the BTT Manta E3EZ board, designed specifically for my Elegoo Neptune 2S printer. The adapter was made using OpenSCAD and is easily customizable for other printers or boards by modifying the constants defined…

Order a print of this model

Printables

Supernote Manta LAMY Safari Vista Pen Clip

Supernote AX2 Manta LAMY Safari Vista Pen Clip Printing Recommendations For best strength, print vertically (with the layer lines perpendicular to the Supernote)

Order a print of this model

Printables

Mantaray Ergonomic Keyboard Case

Description This is the case for the Mantaray, an ergonomic mechanical keyboard I designed. The upgraded version of this project, the Mantaray Pro Wireless, is now available! You can pick one up either assembled , or as a kit . 3D files…

Order a print of this model

Printables

"The Manta" Sculpture

When viewing this sculpture, it seems to majestically glide past you. This manta ray is surely a special highlight on your desk or in your living room. Calmly and gently, it takes its place with its wings, undoubtedly drawing attention.…

Order a print of this model

Printables

Ikea Skadis iFixit Essential/Manta mount

I didn't liked most of the models for the manta kit, as they first take a lot of filament and second mostly don't fit my Prusa Mini. Also there was not really a model for the Essential Kit. As all iFixit hard shells (Essential, Manta and…

Order a print of this model

Printables

BTT Manta M5P Slim Dual 4010 Blower Fan

BE SURE TO HAVE ENOUGH FRESH AIRFLOW TO THE BLOWERS OR A WAY FOR THE HOT AIR TO SCAPE AFTER IT HIT THE DRIVERS, THEY WOULD OVERHEAT IF ENCASED WITH THE BLOWERS ONLY.…

Order a print of this model

Printables

iFixit Manta Gridfinity

6x5 gridfinity bin to hold the ifixit manta set (including the lid/top). This design allows for easy access to all the bits provided but also recessed enough to allow stacking. The weight of the bits holds it down so grabbing a single…

Order a print of this model

Printables

Neptune 3 pro Manta M5P Mount

Mount for Bigtreetech MANTA M5P for ELEGOO Neptune 3 Pro. Had to remove a little of the box plastic (See picture) to let the mounting screws fit. At this height the driver clear the bottom panel. Also include a mount for a buck converter…

Order a print of this model

Printables

AdaptChironBTTManta

J'ai essayé de rester fidèle au modèle de base. Les cotes sont respectées. Je ne suis ni un pro de Fusion 360, ni un ingénieur en mécanique. C'est un modèle assez simple, au final :)

Order a print of this model

Printables

Manta Rays • BTT Manta M8P Fan Case

Description Running drivers at higher currents causes them to become extremely hot. To ensure reliable operation, cooling is necessary. This fan case provides ample cooling for all 8 driver slots and has been tested with BTT TMC2209,…

Order a print of this model

Printables

Prusa MK3s Bigtreetech Manta M8P case (Caribou remix)

Simple Caribou btt m8p case remix for mk3s. Freecad remix is a mess but its working.

Order a print of this model

Printables

Din Mount - Manta M8P (Double Din)

I needed a Din mount for my Manta M8P that would span the rails rather than run along them. It was necessary to try and fit all the electronics in the bay for a Voron 250. Every mount I've come across is designed to run along the rails so…

Order a print of this model

Printables

Hamantaschen Cutter

Note print this in a food safe plastic. PETG will work for a one time use (bacteria could grow if you use this print over time rather than in one sitting). Its a 3.4in diameter cutter. 0.2mm height. 100% infill. Not the chamfered edge on…

Order a print of this model

Printables

Gridfinity iFixit Manta insert

I am reorganizing my tools drawers with Gridfinity . Needed something to keep iFixit Manta kit from sliding around, so I designed one. Set case does not sit very tight in the insert as I am taking it with me every now an then. Also added…

Order a print of this model

Printables

BTT TMC5160T Plus + MCU Board mounting bracket for BTT Manta M8P V2.0

Remixed to fit my Voron 2.4 250 mm with 2x TMC5160T Plus and Manta M8P V2.0 board.

Order a print of this model

Printables

Raya manta articulada

Order a print of this model

Printables

HSW iFixit Manta Driver Kit Holder

About A simple yet secure Honeycomb Storage Wall holder for the iFixit Manta Driver Bit Set . The original design was based on the iFixit Wall Mount (Thingiverse) by TinkerLifeProjects . Remixed to fit a Mako Driver Set on an Ikea Skadis…

Order a print of this model

Printables

Axisflying Manta5 se 10mm Capacitor Holder

Print in TPU, Some tolerance in capacitor slot to use with heat shrink tube

Order a print of this model

Printables

iFixit Manta Shelf • Skadis Interlock

Skadis Interlock Mounting System printables.com/model/1204958-skadis-interlock-a-ikea-skadis-mounting-system

Order a print of this model

Printables

Renkli Mantar Lithophane

Order a print of this model

Printables

MultiConnect IFixit Manta Mount

A quick remix to convert to MultiConnect mounting on Multiboard

Order a print of this model

Printables

CR-Touch Mount for Manta MK2 + ADXL345 Mount with Heat-Set Inserts

Added heat-set insert holes for ADXL345, same inserts as the original model

Order a print of this model

Printables

Manta E3EZ Stepper Driver Fans

Mounts 2 4010 fans above the stepper drivers HW required: 4010 fans x2 M3 30mm x3 M3 10mm x6 You can also use thicker fans if you need to, but regular 4010s work well enough for me. Also not necessary to mount them into all the holes, Im…

Order a print of this model

Printables

Manta Ray with ring

Remixed from z0333 https://www.thingiverse.com/thing:2930315 I wanted this with a ring to attach a string and play with my cat… :) Printed perfectly in one go with a simple brim on my Prusa MK3s with 3DCopper PLActive filament, bed 70°C…

Order a print of this model

Printables

Reduction of keel Manta 2017 RG65

Manta 2017 RG65 sailboat https://www.thingiverse.com/thing:2572866 - reduction of keel by producer MP plast (Mikulka Peter, Slovak Republic) designed for extra large mastbox 53 mm Print Settings Supports: No Resolution: 0,2mm **Infill:**…

Order a print of this model

Printables

Sovol SV08 Manta M8P V2 2020 Mount

This Manta M8P V2 mount should fit the V1 with minor clearancing. I added more material around the mounting locations for M3 heat inserts. I also changed the 2020 mounting to M3 size but that can easily be edited back to the original size…

Order a print of this model

Printables

Manta M8P 2.0 Mounting Bracket for Rat Rig V-Core 4

Not tested yet, but modeled based on oficial files, should fit without problem. Print with at least PETG for heat resistance just to be sure. Needs m3 threaded heat-inserts just like the original part. If you want to modify or remix this…

Order a print of this model

Printables

axisflying manta 5 se arm locking mechanism

Order a print of this model

Printables

Voron 0.2 BTT Manta M5P Mid Plate

Mid plate to mount BTT Manta M5P, Requires 4 x M3 heat set inserts

Order a print of this model

Printables

Manta m8p cooling shroud

Cooling shroud for Manta m8p that uses 4 4010 fans and m3 heat inserts. Made this because I didn't found what I wanted …. My goal was to make it simple , don't use the cb1 bolts for fixing the shroud , cover all drivers , have access to…

Order a print of this model

Printables

ifixit Manta underdesk holder

Simple ifixit Manta kit holder for under desk mounting. Small lip prevents accidental slide out of the kit. Printing Print 2 parts. One in correct orientation, one mirrored. Mounting All you need is 4-6 screws with diameter up to 4mm and…

Order a print of this model

Printables

Lipo guard Manta 5 SE

Protects the LiPo from frontal impacts and prevents it from being ejected during a forward crash. .3mf Profile TPU for Bambu Lab A1 Mini.

Order a print of this model

Printables

Cooling the BTT Manta M8P v.2 board

I decided to install a Noctua NF-A9x14 PWM 92 mm fan to cool the BTT Manta M8P v.2 board. It cools very quietly.

Order a print of this model