1 / 3
CR-Touch Mount for Manta MK2 Duct & Tool Head System
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Centre bed-levelling probe mount adapted to accommodate the Creality CR-Touch
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 156
- Makes
- 2
- Views
- 932
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Whilst installing the brilliant Manta MK2 system by boothyboothy recently I came to realise my bed levelling probe of choice, the CR-Touch, wasn't wholly compatible with the provided mounts due to plug/wiring location in the top of the probe.
This is a rough first draft remix of the originally provided BLTouch centre mount part, with adjustments made to better suit the plug recess.
I have tried to retain boothyboothy's design style in making this.
Things to note:
- Probe Y offset should be approx 39.96mm, slightly more than the BLTouch version (BLTouch pin is centred between it's mounting screws, CR-Touch is bulkier and probe pin is offset)
- This is a first draft, and the area the Manta setup allows for a centre mounted probe is cosy (particularly if using 5015 fans). If you are having clearance issues, feedback is welcome
- The CR-Touch is roughly 2mm shorter overall than the BL-Touch. I have not allowed for this difference in the design, you may be able to compensate using the existing vertical screw slots, or print off a spacer
Todo/Wishlist:
- Print a copy of my own and test/upload photos - will do once my hot end is back together & operational
- Iron out any obvious clearance/offset issues
- Provide editable file if requested
- Off-centre version?
Thanks to:
- boothyboothy of course, not just for the Manta MK2 project but ongoing dedication & contributions to the 3D printing community
- Klaus Massler, whose CR-Touch model (via grabcad) was very useful as a reference