1 / 2
BTT Manta M8P Double DIN mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
BTT Manta M8P mount to be used on two parallel DIN rails. Designed to be 90° oriented inside Voron 2.4/Trident.
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 151
- Makes
- 3
- Views
- 1,125
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This BTT Manta M8P mount is designed to install the MCU board across two DIN rails. This rotates Manta by 90° and helps a better air flow when installed in Voron 2.4/Trident printers.
BOM:
- 4 x Voron RS25 PSU brackets from https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/Electronics_Bay/rs25_psu_bracket.stl
- 8 x M3x10mm screws for RS25 PSU brackets
- 4 x M3x8mm - M3x12mm screws to mount BTT Manta M8P
- 8 x M3x4x5 heat inserts
- 4 x M3 square nuts (can be substituted with M3 hammer head T-nuts)
M3 screws can be SHCS, BHCS or similar.
Instructions:
- Install M3 heat inserts
- Place M3 hammer head T-nuts into slots
- Screw in RS25 PSU brackets into M3 heat inserts using M3x10mm screws. This will also hold M3 hammer heat T-nuts in place
- Install each side of BTT Manta M8P mount on the DIN rails
- Install BTT Manta M8P board using M3 screws and included printed spacers