BigTreeTech Manta M5P Mount with Stepper Driver Fan Duct
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
BigTreeTech M5P Mount
- Rating
- 0 / 5
- Likes
- 34
- Downloads
- 189
- Makes
- 0
- Views
- 1,746
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a hard mount that fits the BigTreeTech Manta M5P control board. It include a fan duck for the stepper drivers
Link for the CB1 Heatsink Fan Mount https://www.printables.com/model/464794-cb1-heatsink-fan-mount
Code to have the fan turn on and off based on the CPU temp
[temperature_fan SoC_fan]
pin: CB1: gpio79
#pin: RPI: gpio26
kick_start_time: 0.8
off_below: 0.8
max_power: 1.0
sensor_type: temperature_host
control: pid
min_temp: 0
max_temp: 100
pid_kp: 1.0
pid_ki: 0.5
pid_kd: 2.0
min_speed: 0.0
max_speed: 0.8
target_temp: 45
Hardware needed
1X 4010m Fan
2x m3 x 6mm screws = for fan duck
4x m3 x 6mm screws = mount the M5P board
4x m3 x 12mm screws = for fan
10x m3 brass inserts
Print Settings
Printer Brand: Anycubic
Printer: Mega Pro
Rafts: No
Supports: Yes for the fan duct
Resolution: 0.2mm
Infill: 50%
Filament: eSun-PETG