Manta Ray Face Shield - Stack ver.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I took Joel Telling's "Manta Ray Face Shield", and stacked them in varieties of 4, 8, 16, 32, and 64 stacks.
- Rating
- 3 / 5
- Likes
- 2
- Downloads
- 321
- Makes
- 1
- Views
- 1,207
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I took Joel Telling's "Manta Ray Face Shield", and stacked them in varieties of 4, 8, 16, 32, and 64 stacks. There is a .3mm gap between the shields, so be sure to print them with a .3mm layer height. The .3mf files I have provided contain settings which I have allow my printer (Prusa Mk3) to half its printing time.
Print these stacks overnight so that you can make more than one between prints.
EDIT 4/8/2020:
I added stacks with .35mm gaps according to feedback from people printing this. In order to test the tolderance on your printer, I recommend printing the 2 stack TEST files I have made. I made one with a .3mm gap and one with a .35mm gap so that you can test which one works best with your printer.
Print instructions
Print in PLA or PETG.
Use 0.3mm layers.
Use at least 3 perimeters (1.2mm shell).
Use at least 30% infill.
