1 / 4
Manta Ray Face Shield - Stack ver. — zdjęcie 1
1 / 4

Manta Ray Face Shield - Stack ver.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I took Joel Telling's "Manta Ray Face Shield", and stacked them in varieties of 4, 8, 16, 32, and 64 stacks.

Ocena
3 / 5
Polubienia
2
Pobrania
321
Wydruki
1
Wyświetlenia
1206
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I took Joel Telling's "Manta Ray Face Shield", and stacked them in varieties of 4, 8, 16, 32, and 64 stacks. There is a .3mm gap between the shields, so be sure to print them with a .3mm layer height. The .3mf files I have provided contain settings which I have allow my printer (Prusa Mk3) to half its printing time.

Print these stacks overnight so that you can make more than one between prints.

EDIT 4/8/2020:
I added stacks with .35mm gaps according to feedback from people printing this. In order to test the tolderance on your printer, I recommend printing the 2 stack TEST files I have made. I made one with a .3mm gap and one with a .35mm gap so that you can test which one works best with your printer.

Print instructions

Print in PLA or PETG.

Use 0.3mm layers.

Use at least 3 perimeters (1.2mm shell).

Use at least 30% infill.

Tagi