I fixed it (for ifixit Mako)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I really like my ifixit set, but I could never read the lettering on the foam. So, I fixed it.
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 181
- Wydruki
- 2
- Wyświetlenia
- 1500
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
NOTE: : Your lid might not fit right unless you modify it. It's not a problem for me because I keep mine in a drawer with the lid off. Also, this print has tight tolerances. Make sure your printer is calibrated.
Be advised, I have an older version of the tool set purchased in 2016. There are two or three bits in my set that are different from the new Mako set.
I really like my ifixit set, but I could never read the lettering on the foam. So, I fixed it.
-If you want this to be multicolor, you can change colors by layers.
-You may have to play with your slicer settings to minimize gaps in the top three layers. I used ironing on the top layer.