iFixit Mako Driver Kit Rugged Box Frame (screw hinges)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rugged box frame for the iFixit Mako Driver Kit. Uses M3 screws for hinges.
- Ocena
- 4,926 / 5
- Polubienia
- 127
- Pobrania
- 439
- Wydruki
- 27
- Wyświetlenia
- 2285
- Oceny
- 27
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
iFixit Mako Driver Rugged Box Frame
I wanted something with better hinges / latches than the iFixit Mako Driver Kit box frame so remixing it with Rugged Box (Parametric) seemed like an obvious solution.
This uses the dimensions from the .step file in the iFixit Mako Driver Kit box frame. It is a snug fit so I have also included models with extra clearance.
You should be able to seat the Mako case flush with rugged box so that it closes completely without effort.
I included the model file for the TPU seal but it is not needed at all.
Requires:
- 6x M3 screws for hinges and latches (choose your length - 16mm, 20mm, 25mm, 30mm, 35mm)
2024-02-05
- Added versions for other screw lengths (16mm, 20mm, 25mm, 35mm)
2024-02-06
- Added versions with extra clearance if the fit is too tight.
Printed with eSun PLA+. The photo's show 30mm hinges.