Multiboard "clamps" for mounting behind a Lenovo screen
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed Multiboard pieces in order to have a Multiboard on the back of my Lenovo screen
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 652
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
== Aha moment ==
There's so much unused space behind my pc screen (Lenovo ThinkVision T24i-10) that I though it would be the best place to have a Multiboard and hang some of the things laying on my desk.
== Problem ==
Drilling the screen won't be a good idea, and gluing didn't sound as strong enough. I needed some clamps, claws, clips, whatever
As you probably understood by now, this model is related with the Multiboard, a masterpiece designed by Jonathan from Keep Making, so go check all his stuff because it's worth it
- Youtube channel: https://www.youtube.com/@Keep-Making
- Multiboard website: https://www.multiboard.io/
- Models (on thangs): https://thangs.com/designer/Keep%20Making
== This model/remix ==
This mode has 2 adaptations of the 8 mm Offset, Trio Command Strip Mount - DS Part A, one for the top clamp and another for the bottom clamp, as both edges of the screen have different sizes and formats.
== Additional parts ==
Aside from these 2 models I used the parts bellow to compose the Multiboard:
- 1x 6x4 Multiboard Side Tile
- 1x 6x4 Multiboard Corner Tile
- 2x Trio Snap Connector - DS Part B (to lock in place and reinforce the clamps)
- 1x 8 mm, Cross Quad Offset Snap - DS Part A (to join both tiles)
- 1x Cross Quad Snap Connector - DS Part B (to lock the snaps)