Multiboard "clamps" for mounting behind a Lenovo screen
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed Multiboard pieces in order to have a Multiboard on the back of my Lenovo screen
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 36
- Makes
- 0
- Views
- 654
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
== Aha moment ==
There's so much unused space behind my pc screen (Lenovo ThinkVision T24i-10) that I though it would be the best place to have a Multiboard and hang some of the things laying on my desk.
== Problem ==
Drilling the screen won't be a good idea, and gluing didn't sound as strong enough. I needed some clamps, claws, clips, whatever
As you probably understood by now, this model is related with the Multiboard, a masterpiece designed by Jonathan from Keep Making, so go check all his stuff because it's worth it
- Youtube channel: https://www.youtube.com/@Keep-Making
- Multiboard website: https://www.multiboard.io/
- Models (on thangs): https://thangs.com/designer/Keep%20Making
== This model/remix ==
This mode has 2 adaptations of the 8 mm Offset, Trio Command Strip Mount - DS Part A, one for the top clamp and another for the bottom clamp, as both edges of the screen have different sizes and formats.
== Additional parts ==
Aside from these 2 models I used the parts bellow to compose the Multiboard:
- 1x 6x4 Multiboard Side Tile
- 1x 6x4 Multiboard Corner Tile
- 2x Trio Snap Connector - DS Part B (to lock in place and reinforce the clamps)
- 1x 8 mm, Cross Quad Offset Snap - DS Part A (to join both tiles)
- 1x Cross Quad Snap Connector - DS Part B (to lock the snaps)