Multiboard Paper Towel Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A paper towel holder designed for the Multiboard system. Presented in Push-Fit, Pegboard Click and Bolt-Lock adaptations
- Ocena
- 4,5 / 5
- Polubienia
- 294
- Pobrania
- 1018
- Wydruki
- 10
- Wyświetlenia
- 4335
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Overview
A complete print in place paper towel holder for the Multiboard system. It will require four snaps. Push-Fit, Bolt-Lock and Pegboard Click options available. It's a good idea to have access to the back of your board if you use the Bolt-Lock option. The Bolt-Lock option requires 4x Small Thread Lite Multipoints and 4x raised snaps. I would personally avoid the push-fit option as it is not the most reliable in my findings.
New to Multiboard? Start HERE. It's free!
*gif courtesy of Jungl3
Printing
Print in place. I use an outer brim for added bed adhesion. I do not recommend the push-fit option.
Nozzle: .4
Filament: PLA/PETG
Layer Height: .2
Supports: No
Infill (%): 10%
Build Plate Adhesion: Yes. Outer Brim.
Take a look at my other Multiboard add-ons, or any of my Spooky Items while you are here.
Like my work?
❤ a few of my models
and
Special Thanks:
KeepMaking for creating Multiboard
Jungl3 for creating the Paper Towel Holder and the borrowed gif
Edits:
7/30/25 | Error in direction of push-fit was addressed. This should not effect most who have downloaded already. Bolt-Lock option added.
7/31/25 | Pegboard click option added. Bolt-Lock option updated.
8/1/25 | Few small edits for QC.