Liczymy pasujące modele…
Use-case This geared self-clamping and self-releasing hook is ideal to hold towels that have no hanger (or have an owner that is too lazy to use hangers). To hang up the towel, simply touch the lower lever slightly from the bottom and it…
Wydruk około 2,25 €–2,75 € nettoWstępna wycena jednego wariantu
Help me create more FREE models! If you enjoy my creations, consider becoming a supporter of my Printables club or you can buy some of my products . Your support helps me cover the costs of materials, energy, and time, allowing me to keep…
Wydruk około 1,64 €–2,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This hook is designed to fit the bathroomheater (eg. Badheizkörper Schulte München rund 1215x500 mm weiß mit Mittelanschluß) with a piperadius of 11mm (d=22mm) and a pipedistance of 42mm. The dimensoins of the hook are designed as 23mm…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Baseplate with hook gets screwed to the wall. A cover hides the screws.
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
*** UPDATE (Nov. 2023) *** Some people experienced issues with the tight tolerances around the hinges, so a version with slightly increased tolerances is now available. If your printer is well tuned, I still recommend the standard version…
All of us have at least once seen our towel flying because of the wind, well with these clips the beach towel will remain where you left it, I hope you like the idea and the design inspired by waypoints, the design is designed to be as…
Description A beach towel holder to be fitted on sand avoiding your towel flying away! It can be used also as peg thanks to the additional hook. Material recommended: PETG or higher temperature material (like abs or asa). This gadget is…
Tactical reload paper towel holder for IKEA Skadis peg board. Houses rolls up to 24 cm in length and 16 cm in diameter. I remodelled the original lever and added a curve to the roll contact face. Still fully interchangeable with the…
Made a hook with a hole to hang some stuff around the house. it is strong enough to hang a winter coat, i believe it can bear a lot more load but didn't test the max strength. Print settings layer height: 0.12 mm Number of walls: 4…
Overview A complete print in place paper towel holder for the Multiboard system. It will require four snaps . Push-Fit, Bolt-Lock and Pegboard Click options available. It's a good idea to have access to the back of your board if you use…
This is key/opener for Merida paper towel dispenser. Made 1:1 based on original tool. It will likely fit older models of paper dispensers but you may try it with one you own. Pointy things are approx 4x4mm cross section, spacing is approx…
This model is made to be large, stable, and durable, perfect for everyday kitchen use or your workshop. The hexagonal shape gives it a unique geometric look while also improving rigidity and strength compared to simple round designs.…
Got inspired seeing this in a video short made from wood, so decided to make one myself on 3D printer. Please print bo parts flat with top part with tabs on the bottom, I did mine without supports on both prototypes prints and had no…
This is a modified version of the endcaps for the paper towel support.
2 hooks suitable for printing in most rigid materials. The cam slot has 2 sets of retainers internally to grip most materials. Works well printed with 0.4mm nozzle with 0.2mm layer height. Solid infill is recommended for strength. The…
this is a modified version of the endcaps for the paper towel support.
This is a remix of the great paper towel roll holder by ÖE to better support using command strips since I'm renting and can't go drilling holes in the cabinets. The Papertowel-a-nohole v2 was my first version where I just removed the…
I was trying to hang a roll of toilet paper on my pegboard, but didn't have a wooden dowel necessary for the tube in the middle. So i tried the fully 3D printed version of this model, and the holder pieces at each end were too far away…
This paper towel holder allows the person in need to tear a piece of paper with only one functioning hand. IT REALLY WORKS =) Only 60 grams of filament! !!! Use tube-o-matic for the auto-resizing tube. Diameters of 44mm to 47.5 should be…
I was literally just thinking that I should do something about the request to make a paper towel holder for the wire shelves that my lovely spouse made when the Printables Paper Towel Holder mini-contest hit. So… here we are! Most of the…
A minimalistic towel rack which can be screwed with some counter sunk screws. Screws will be hidden under the cap. Easy to print without any support
Simple hook for a radiator with pipe diameter of 20mm. Print in petg to avoid deformation Please let me know if you need customization Einfacher Hacken für einen Sprossenheizkörper mit einem Rohrdurchmesser von 20mm. Um verformen zu…
Paper towel holder for the 20 mm Conduit Kitchen Rail . Print two of the “Paper Towel Holders” and two “End Caps.” Cut conduit to appropriate length, and insert into the Paper Towel holders. Insert the End Caps and mount it to the 20 mm…
Hook for towels on shower glass door. Fits best on 6mm glass door.
When I got one of those generic 3-in-1 gadgets, I realized I got the clone of a clone that was missing parts to stabilize the roll inside. I printed in PLA with 2 perimeters and 0 top/bottom layers for faster printing. Feel free to extend…
J'ai modélisé ce support pour essuie-tout au design minimaliste ! Super pratique et il s'imprime sans supports. Matériau : PLA ou PETG pour une bonne rigidité. Hauteur de couche : 0.2 mm Remplissage (Infill) : 15-20% Supports : Non…
Z estetických dôvodov odporúčam upevniť obojstrannou páskou alebo lepidlom.
Remix of original model to allow more / less hooks, diferrent spacing, etc.
Hier ist mein designe für einen Handtuchhaken, den ich nun bei mir in der Küche hängen habe. Als Handtuchhaken (für Hände) habe ich mich für die Sechsfinger Hand aus der Serie „Willkommen in Gravity Falls“ entschieden. Ich finde, sie…
Simple towels hook for the bathroom. It has an inner radius of 11.5 mm. In case you are going to use it with a towel dryer you should print it at least with PETG as PLA may start melting.
This is a modern but also minimalistic design of a wallhook for hanging towels in the bathroom. Printing works with support. Mounting can be done using glue (please take care to not damage your wall in case you want to remove the hook…
A geometric pleasing towel hook ready to print for your bathroom or kitchen or wherever you like to hang towels.
The hookpart prints flat on the printbed which makes it quite stable as a hook. Glue the dovetail baseplate onto the tile using silicon or comparable glue. Align the plate well vertical and let it cure sufficiently (for silicon at least…
Haken mit doppeltem Ausleger für Bad, Küche oder andere Räumlichkeiten. Hält mühelos 2 größere Handtücher oder andere Bad Accessoires. Gedruckt in PETG silbergrau. 4 Perimeter min. erforderlich Den Haken habe ich mit Silikon angeklebt um…
I want to have special towelhook for Towel day (25.5.), it is simple I am just starting to model.
This is a towel hanger for tube radiators. You need for this: 2x M5x30 countersunk screws 2x M5x10x7 brass beat inserts 1x 30mmx15mm clothes rod (…
This is remix of paper towel holder with OpenSCAD customizer. Original project: https://www.thingiverse.com/thing:5178187 Default inner diameter of paper rolle is 43.5 mm. Measure your inner paper rolle diameter and change value w2 in…
You can hang towels on the outside and bath towels on the inside. The extended version had to be drawn for the kids so they could reach the towels. The original wall size is 136 mm, but you can modify easily with prusa slicer, before…
This is a pair of bathroom towel hooks. If you only use just one hook, the towel will not dry very good by just hanging down. To avoid this, you can hook one corner of the towel in the clip-hook, to span the towel for better drying. You…
Zuca cart towel handle to clip, or hook off. I use it for my karabiner to clip onto. PETG 0.2mm 15% infill 3 perimeters (Print Settings > Layers and perimeters > Vertical shells > Perimeters) Auto supports It should have better integrity…
Small towelhook for on the ovenhandle.
Towel Clip modify Bottom 90 degree
This is a hook for my bathroomheater. It might fit yours too. The hook will fit if your heater pipes are similar to this: Height: 30,4mm Depth: 10,3mm
Towel rack for a glass shower cabin. Fits 8.4 mm wide glass.
moderner Badezimmer Wandhaken / modern Towelhook
a simple holder for pipes with diameter 20mm, can be used with or without braces in .stl the holders are screwed to the wooden wall with 4,5x60mm chipboard screw
Holder for Paper Towel for IKEA SKADIS. Print settings: Printer: Prusa Mini Nozzle: 0,4mm Material: PLA Layer Height: 0,2mm Bed Temperature: 60°C Nozzle Temperature: 215°C Infill: 100% Supports: no
For securing the towel. Stays there during washing and drying too. No need for drying line pegs, easy to put on the hook too. Reuploaded from Thingiverse and fixed the STL (it had broken normals).
I designed this towel hook to test the ability of my new MK4s with overhangs. The overhang has 70 degrees and works perfectly! There is a single towel hook file, which can be combined in prusa slicer to an arbitrary number of connected…
A minimalistic towel rack which can be screwed with some counter sunk screws. Screws will be hidden under the cap. Easy to print without any support
This is a very simle print to organise your towels on the radiator. Quick installation, no drilling or gluing required. It can be easily hung Any position on the radiator at different heights and any time intervals.
My towel rack broke so you know what had to happen!
Designed for bathroom heater with tubes of diameter 25mm (fi) and distance between tubes 9-11mm (gap). I discovered that distance between are randomly, so I decide add some “spring” to make locked mounted even that. Print on side - like…
Extra towel hanger compatible with Iconic Nordic Rooms INR LINC Shower systems . Simply screw it in on top of your INR LINC system. Print instructions Supports: Everywhere Infill: 100% 0,20mm (SPEED) Filament: PLA Support removal It's…
I printed @ .12mm layer height and it avoided any overhang issues, you can then just print as normal. I suspect a .2mm layer height would work as well, but I have not tested that. I just had standard #8 (~4mm metric) diameter flat head…
Unsatisfied with other towel hook designs that would come loose and break from the weight of grabbing a towel, a towel hook with high mechanical strength for durability and strength.
This is best printed in PETG or stronger materials for any load over a few kilos. Excellent for hanging towels, coats, or bags over a slim door. This hook is designed to be hung on mirrors/doors/objects 25mm (~1 inch) or less in…
Updated Version V3 Redesigned the hook completely. Better snap to the radiator rods aswell as easier print without tapered design. I highly recommend to print this hook in PETG. I used Prusament Galaxy Black PETG, wich work like a charm.…
This model provides a quick and convenient way to hang towels, washcloths, or clothing on your bathroom radiator. Its smooth, curved shape clips securely onto a horizontal radiator bar without scratching or damaging the surface. Clips are…
paper towel holder prints flat on bed. allows adjustable tension on roll by decreasing the space between the arms. build of materials: M5 x 10mm Flanged Button Heads https://amzn.to/4bSx4DP M5 T Nuts https://amzn.to/4iE1UCM see my profile…
Ajustable parametric model of a two part towel holder with place for rubber feet, printable on small printers ( can be ajusted via bed length variable in project "VarSet" sheet ) ajustable wall thickness ajustable overall length Modeled…
Ever had your towel slip off the hook and onto the floor? This towel holder's wedge shape solves that problem. It gently pinches the towel in place, so it stays put until you're ready to use it. There are 2 versions of the holder: For…
I designed this towel hanger for my RV. I wanted to avoid a hook that could break. I recommend printing this part vertically. I used .2mm layers and a 15% infill.
Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — Let’s be honest, who is really taking the time to spread out a kitchen towel tidy over a bar? And If you are using a…
Gravity Hook | The BEST Towel Hanger Endless Customizability for Your Pattern | Prototyped this design 10+ times | Sleek & Aesthetically Modeled Design I saw this design when I was looking for an accessory for one of my printers and I…
The original Umbro Ice Towel bottle has no gasket or sealing ring, which often leads to leaking – especially when the bottle is tilted or lightly squeezed. I designed this flexible gasket ring to fit perfectly into the cap groove and…
Overview A complete print in place paper towel holder for the Multiboard system. It will require four snaps . Push-Fit, Bolt-Lock and Pegboard Click options available. It's a good idea to have access to the back of your board if you use…
I've been making a few thing that slide on my pool fence to hang tools, floats, shelves, etc. This is the latest one, a hook to hang a pool float, toy, or a towel. It just slides right over the pool fence and is very strong.
A small model to add hangers to my bathroom towels heater. To check if this model will work for you, you have to check 2 measurements on your towel heater : tube diameter : 25mm distance between tubes : 14mm To build it, you need some…
Tired of draping a wet towel around your neck? Frustrated by never knowing where to put your towel, only to watch it get blown by the wind onto the ground covered in dirt and gravel? This belt towel hook solves these common problems for…
Spare key for Vialli towel, soap and toilet paper dispenser. Made from a scan of the original one
Towel rack holder print twice: Towel_rack_holder_9.8mm_hole.stl andd once: towel_rack.stl
A functional and aesthetic hook designed for hanging towels, bathrobes, or clothes on a bathroom radiator . It features a fun accent inspired by LEGO bricks. • Compatibility: The hook is designed for mounting on radiator pipes with a…
Remix of original model to allow more / less hooks, diferrent spacing, etc.
Grip any towel and attach to an oven door or drawer handle. Removable, flexible and strong using TPU.
Kitchen towel holder. Holder for standard towels diameter 130mm length 225mm. Recommendation for printing PLA, nozzle 0.4mm layer 0.2mm, infill 15% mesh.
Haken mit doppeltem Ausleger für Bad, Küche oder andere Räumlichkeiten. Hält mühelos 2 größere Handtücher oder andere Bad Accessoires. Gedruckt in PETG silbergrau. 4 Perimeter min. erforderlich Den Haken habe ich mit Silikon angeklebt um…
Kitchen hanging rod & Paper towel holder using a wooden broom handle
Loved the original concept, simplified it by making it assemble via 5 x M2.5x10 self tapping flat head screws.
Paper towel holder for IKEA Bror. I'm using it on 190cm high Bror variant. Printed from PETG, no supports. Mirror second part in slicer or use provided 3mf file. Additionally needed: 53cm (or close) long, 20mm diameter wood or metal rod…
Basic one-piece paper towel holder, made for double-sided tape mounting. Category: Kitchen & Dining
This universal clip-on hook is designed to fit perfectly on 25 mm round towel radiators. It provides a simple way to hang towels, brushes, bags, or any other bathroom accessories neatly and within reach. No screws or tools are needed —…
Created an opening on top so it can be pulled away from a door handle (or other anchor)
I needed to be able to hang towels on the door and I didn't want to permanently install a towel hook. I designed this to be a low-profile over-the-door hanger that you can easily move around as needed while still being strong enough to…
I designed a towel hanger for doors where there is not much room between the door and frame. Printed with PLA on the side with a brim and supports between (breaks easily).
Printing Recommendations Material (Crucial): It is highly recommended to use PETG . PLA lacks the necessary toughness and creep resistance for threaded joints, which may lead to snapping or wearing down over time under tension. Lamp Post:…
This is a modified version of the shaft which allows some variations in the length of the paper towel rolls. If the brackets are set to allow longer roll, you can't attach a shorter roll in case you buy another brand. As it is harder to…
This model goes with https://www.printables.com/model/1581584-phone-hook-for-10mm-glass-shower Print in at least PCTG
