Gravity Towel Hook | The BEST Towel Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a great towel hanger that you can use as bathroom decor or for a great functionality! I hope you enjoy!
- Ocena
- 3 / 5
- Polubienia
- 271
- Pobrania
- 1038
- Wydruki
- 3
- Wyświetlenia
- 8181
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Standard Digital File License
What makes it special
I spent about a month and a half, off and on, working through versions of this towel hook before I was happy with it.
I first saw a design like this while looking for an accessory for one of my printers. It looked modern and useful, so I kept testing patterns and versions until I had one I liked. It comes with a stock hexagon pattern, and you can change the pattern in your slicer with only a few clicks. I prototyped this design more than 10 times.
The hook grips by gravity. When weight is applied it clamps on its own, with no springs or latches, and the parts snap together for a strong, sturdy design. It holds firm without tearing or pinching the fabric, and two ready-made screw holes make it easy to attach to your wall. It stands up to daily use in bathrooms, kitchens, garages, or outdoors.
It is meant for hand towels and lighter ones. I do not recommend heavy towels. If you do use a heavier towel, curve the top of it so it stays in place and does not slip.
Customize the pattern
(Prusa Slicer, Bambu Studio, Anycubic Slicer Next)
Follow this tutorial if you do not use one of the provided profiles.
Step 1: Import the file to your slicer.
Step 2: Place it on the face, as shown in the photo.
Step 3: Right-click and add a Height Range Modifier, set from 0 to 7.75 for the best results.
Step 4: Click Range in the sidebar, and turn top and bottom shell layers to 0.
Step 5: Go to infill and infill pattern, choose which pattern and which percentage of infill you want. I recommend honeycomb or triangles, at 25%-40%. Then enable supports (tree auto) for the best results.
Print and enjoy your custom pattern! Note: the customizable pattern is only visible when you slice the blank patterned design profile or follow the tutorial above.
Size (±1 mm)
Base Part: 50 x 125 x 13 (mm)
Hook/Top Part: 35 x 120 x 26 (mm)
Together: 50 x 125 x 26 (mm)
Screw Hole Size: 5 (mm)
Print settings
Infill: 25%
Infill Type: Up to You
Perimeters: +2
Filament: PLA or PETG
Brim/Raft: NO
Supports: YES/NO, Yes if you are doing the custom pattern choice.
Good to know
.3MF print files are included for Prusa Slicer, Bambu Studio, and Anycubic Slicer Next.
My Patreon page is still available at patreon.com/MasterPrinter, but I do not actively update it anymore.
You may also like
Sleek Carabiner (Travel Essential)
Tooth-Paste Squeezer (Travel Version)
Modern Earbud Holder (Travel Essential)