663 modeli
This easy-to-print broom holder uses a rolling gear and the broom's own weight to securely clamp it in place. Just lift the handle slightly as you push it in place to lift the gear, and then let it settle back down to lock in place. To…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
I also hopped on the 3D printed gravity knife craze, I just designed mine with a slightly different approach. The handle is slightly redesigned version of the beautiful Carrot Gravity Toy Knife remix made by Chris Klepel . Have you…
Wydruk około 2,06 €–2,51 € nettoWstępna wycena jednego wariantu
Support me & Join Printables Club This is a spoolholder modification for MMU2S. For auto rewinding filament spools are using gravity. UPDATE: For those who do not have original bases, I added a modified printable base. And source STEP…
Wydruk około 0,64 €–0,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Version 2 Available 💊 Ultimate Weekly Pill Organizer & Dispenser (Gravity Cascade System) 💊 Looking for a smart, functional, and stylish way to manage your daily supplements and medications? This Weekly Pill Organizer features an…
Wydruk około 4,51 €–5,51 € nettoWstępna wycena jednego wariantu
After taking heavy inspiration from other gravity knives desings, I decided to make my own fully printable version. With this design you don't need any extra hadware, you can just print all the parts, even all at the same time if you want…
Wydruk około 4,21 €–5,14 € nettoWstępna wycena jednego wariantu
Hi, I always wanted an affordable, uncluttered and reliable mechanical pencil that I can always carry with me. This is the 3d printed solution I came up with. It's a simple mechanism, allowing you to adjust the length of the leads using…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
🧢🧣Gravity Holder – Cleverly Held by Gravity!⚪ The Gravity Holder uses a freely moving ball that securely clamps objects in place using nothing but pure physics and gravity! Simply slide a towel, cap, or scarf between the holder and the…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu
A remix of LoboCNC's Gravity Broom Holder , integrating 3 and 4 holders within a single block. For compact storage of multiple brooms or other tools, requiring fewer screws for mounting on the wall. Adjacent holders have been slightly…
Wydruk około 0,52 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Description This is a remixed and upgraded version of the original Gravity Broom Holder, made for smart and secure storage of tools, broomsticks, or garden gear with round handles. The system allows you to organize various handle sizes –…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
The double cone object rolls UP the ramp due to their physical properties. To learn how this works, watch my YouTube video explaining everything here as I designed this for that video :) Please heart this design if you like it as it helps…
Wydruk około 6,93 €–8,47 € nettoWstępna wycena jednego wariantu
Decided to remix my remix and make the original gravity broom holder but with through-holes for screws vertically aligned to anchor into a wood wall stud (or whatever vertically aligned anchoring medium you want!) Made the countersinks…
Wydruk około 2,65 €–3,24 € nettoWstępna wycena jednego wariantu
To replace the stock Prusa base - allows reuse of the parts already printed for the https://www.prusaprinters.org/prints/10370-gravity-spoolholder-for-mmu2s Also included is an MMU2 version, HEX bottom (Same HEX pattern as sides) added…
Wydruk około 2,96 €–3,62 € nettoWstępna wycena jednego wariantu
With my DLP printer in mind, I wanted to redesign the original model, so that I could print a complete model and cone in 1 pass. (please read on.. there is also a FDM print) In the video it was showed that if you put 2 tracks together,…
Wydruk około 7,31 €–8,94 € nettoWstępna wycena jednego wariantu
Complete AI workflow in antigravity. Agent produced workflow - agent fixed model - I had to slice it... but that is probably solvable as well. The real magic happens with the strict json file it creates for a prompt so all orthos are…
Wydruk około 2,48 €–3,03 € nettoWstępna wycena jednego wariantu
Print, assemble and play directly, no screws needed 8-11
Based on a popular model seen on TikTok, this fidget toy's files have been very difficult to find. So, I made it myself. Included in the files are a short, 30mm bladed version similar to the ones seen on TikTok, as well as a longer 50mm…
Original files from the video as seen on TikTok! credit to https://space.bilibili.com/11381512 To connect the blade to the housing I used an M3x16 screw and a nut with pin set V1. You could also superglue it in with pin set V2 if you…
A major capacity upgrade for your egg storage: This is a Double-Track Remix of the popular egg dispenser. Based on the concept of a single gravity-feed egg trough, this design doubles the number of tracks, allowing you to store and…
Gravity knife fidget toy to keep your hands occupied. Updated with a safe blade and two comb blades. Assembly: The Peg should be printed two times. All the tiny blobs or other printing defects should be removed if any. BaseBottom and…
Leave a Like or a Make to support me ;) Improvements: -clampable clip with different dimensions (depending on the ventilation grille, see pic) -reinforced backplate -attachment points changed to be able to grip even large smartphones The…
Check out my new Toy Switchblade design here . This is my gravity utility knife design. I also made a toy blade if you just want to use it as a fidget toy. If you enjoy the design a like or make would be appreciated. Check out my new…
This is a 40mm sized remix of the gravity knife fidget toy. I found the original 30mm version to be a little too short, and the 50mm a little too long. I removed a 10mm section from the middle of the 50mm version. Open “Gravity Knife 50mm…
"It's a deal!" Bill Cipher was a triangular dream demon, formerly existent only in the mindscape before succeeding in gaining access to the real world. He had been running amok in Gravity Falls, Oregon since being summoned by Stanford…
Remake : Damon Cui's remix Original : DaFizzlesz I made a different model from the original version.
Hang it. Hold it. Keep your broom within reach and clear up floor space. This wall-mounted gravity broom holder combines a compact honeycomb-inspired shape with a moving gripping wheel. The wheel moves along the toothed track to grip the…
Even more slightly improved Cat Water Bowl, with just added legs for stability. Thanks to mitchell_cj for the original model and minar for improved one. Print instructions Printer brand: Creality Printer: Ender 5 Rafts: No Supports: No…
Check out my Amazon Page to see what kind of gear I use to make these models! VIDEO: https://www.youtube.com/watch?v=1YpuNLxkGPs Defy gravity with this awesome wine bottle holder! A classic woodworking project, now you can make one with…
This is my new Anti-Gravity Roller! Yes, it is right in the name! The roller rolls against gravity (At least it seems to until you look close enough) If you liked this model, check out my other illusion model: THIS IS THE LINK This is…
You should check out my print in place version: https://www.printables.com/model/1215608-print-in-place-gravity-knife-v1 Due to its popularity on printables(There is already several remixes). I feel I should Reopload my gravity knife from…
This is the best thing I've ever made! I have ~20 scattered around my house, stuck to things ready to cut things open. It's a quick draw utility knife inspired by the TIKTOK GRAVITY KNIFE FIDGET TOY . I'd strongly suggest printing out the…
A simple but awesome tensegrity planter, easy to print and assemble. Print two bases without supports and assemble them with two threads like in this video: https://youtu.be/JoDM98kb-DU Print the planter with supports (they should be…
This remix of Michal Fanta's excellent gravity spoolholder has a tweaked ramp design which reduces the vertical fall and kachunk noise of the original. Michal's project is of interest to MMU2S owners because it eliminates the need for a…
This universal dock uses the laptops own weight to clamp it gently but firmly. No supports needed no bolting or glue required, everything is press fit so make sure your flow is well callibrated. The (identical) sides are printed in PLA or…
Securely hold photos, prints, and various paper goods in place with effortless ease. this simple paper organization and display system allows you the freedom to change things up effortlessly. Transform any wall space with a fresh…
Broken up into individual pieces for dual-color printing. I deleted the inner parts of the eye rather than painting them white but if you can do 3 colors, go for it! Grab the bowtie from the original here…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This solid gear lets you use only infill instead of requiring walls for the inside of the hollow gear, this is lighter and faster to print (confirmed with slicer) Or you can print it 100% infill for a more engaging experience.
Easy to print and much easier to assemble. Little or no support. Have fun.
I just loaded burhop's screw into Repetier and simplified the model to reduce the STL file size. Category: Mechanical Toys
Hier ist mein designe für einen Handtuchhaken, den ich nun bei mir in der Küche hängen habe. Als Handtuchhaken (für Hände) habe ich mich für die Sechsfinger Hand aus der Serie „Willkommen in Gravity Falls“ entschieden. Ich finde, sie…
This is a set of modular, stackable, packable and configurable trays for sorting and storing items. These can be used to quickly sort a bunch of items. Just stack various gravity trays, with different filters, pour the items in the top…
Gravity Angle Gauge – 0–90° 📐 A simple and practical gravity-powered angle gauge for measuring vertical angles from 0° to 90° . Thanks to gravity, the pointer automatically indicates the angle without batteries or electronics. It can also…
just put in some lead instead of the magnet. you can leave the upper magnet in place.
This is a simplified 3D model of a DFRobot Gravity lightning sensor. I created/used it as a reference model while designing the enclosure for a volcanic drone payload project. The model is mainly intended for mechanical fitting, layout…
It’s important to print it in the same orientation as shown in the picture und completely solid, otherwise, it won’t hold up. Also, make sure to use a material other than PLA. I printed mine in ASA, though a stiffer material might work…
This is a two part model to hang a 54mmm (53.3) Normcore gravity distributor tool to a Multiboard panel. The model is designed to work with the rubber stand included with the tool. The Snap Mount attachment model is a separate part to…
This model was made for a local coffee shop that had a really bad storage for coffee sleeves. I had the barring for years and decided to put it to good use. The model prints in two haves so that the steps from the angled section can be…
Originally the remix of the ingenious Car Vent Gravity Phone Holder by Abdel Darwish that in the version V3 I remodeled from the scratch, keeping the original idea and general outline. Main changes in V4 (2025-07-26) Changed parts : Arm…
This comes in 2 parts. The funnel should be glued onto the bottom part. The diameter of the hole is 14 mm.
This is a Gravity, or motion, deployed Hidden Blade. Inspired, obviously, by Assassin's Creed. Printed at 0.15 mm Layer hight, 15% infill, 3 walls, and in PLA. You will need support for the locking tab at the front of the main housing. I…
Hi ! I loved making this first print in place hinge and wondered what could the second version bring. => Gravity lock ! Concept : This hinge is perfect for extending a table. Once the hinge is in its contracted position, the geometry of…
Gravity Hook | The BEST Towel Hanger Endless Customizability for Your Pattern | Prototyped this design 10+ times | Sleek & Aesthetically Modeled Design I saw this design when I was looking for an accessory for one of my printers and I…
This model was made for a local coffee shop that had a really bad storage for coffee sleeves. I had the barring for years and decided to put it to good use. The model prints in two haves so that the steps from the angled section can be…
This is a model are based off of a Halo-gravity traction (HGT) device created at Ann & Robert H Lurie Children's Hospital of Chicago. It's intended use is for medical education and fostering medical play opportunities. The model is scaled…
These are the body and screw-on lid for a container that can be used with fine grain activated carbon as a passive, immersible filter. Print both parts in spiral vase mode with 3-4 bottom layers and 0.2 mm layer height. Works perfectly…
Frustrated with the low cranking amps of the stock battery in my 2018 Mustang GT350R I ordered an Antigravity ATX20-HD lithium phosphate battery with a much higher CCA rating and significantly reduced mass. Because the ATX20-HD is much…
You just need 4 x M4 screws to attach the sides , 2x M8 countersunk screws and optionally a Pneumatic fitting for the PTFE Bowden tube.
This is a digital 3D printable model of a Lightsaber Gravity Stand - Magnetic Display Stand, designed to create an eye-catching magnetic levitation effect . With the right magnets, your lightsaber will appear to float in mid-air,…
OnShade CAD Document Printed with PETG 4 wall loops 25% infil Modifier over tab 50% infil 6 wall loops
This heart-shaped fidget sphere is a tactile desk toy made up of 10 interlocked pieces that slide freely using gravity. When held from one side, the remaining parts smoothly slide downward until they reach their limit, creating a…
Zásobník a dávkovač baterií AA / AAA (Gravity Dispenser) Už žádné poházené baterie v šuplíku! Tento model je praktický gravitační dávkovač , který udržuje vaše baterie AA a AAA přehledně uspořádané. Je navržen tak, aby zabíral minimum…
This wall mountable rack for three usb charged gravity pepper mills comes in two parts for easy printing and assembly.
The files feature: - Pre-separated into 29 keyed and interlocking parts - Has a hole pre-cut through the length for a 1" diameter support rod - Bambu Studio Project and GCODE files - Wrapped and Clean variants of the grip parts - Variant…
chin mount for leatt gravity 1 and 2, zip-tie nubs sit in the recesses. made the nut hole bigger and reduced some weight with v2
Just a Scrub Daddy sponge holder with some add-on for drainage into the sink. Print needs supports, so print in the orientation that works best for you. ______________________ As a special treat I colored the model as ScrubBob (or…
jednoduchý stojan k vyvážení těžiště RC modelu letadla, material PETG
Technical Description / Technický popis English Version Basic Protective Box for DFRobot Gravity Expansion Board (Raspberry Pi Pico) This is a functional enclosure designed specifically for the DFRobot Gravity Expansion Board for…
This is a AA battery box, Please do not attempt to scale this in a slicer as it will mess up the dimensions. I would advise using touching build supports so the overhang in the bottom doesnt sag too much. Made by myself in Tinkercad (ik…
No more wrestling with a wet towel, which always wins due to gravity. 🚿 Printing: - With tree supports required, - 0.2 mm layers - 0.4 mm nozzle
Going on vacation or just tired of manually watering your large plants? This modular, gravity-fed watering system turns almost any standard empty soda or water bottle (like Coca-Cola, Pepsi, etc.) into a slow-drip reservoir for your…
Complete AI workflow in antigravity. Agent produced workflow - agent fixed model - I had to slice it... but that is probably solvable as well. The real magic happens with the strict json file it creates for a prompt so all orthos are…
Wydruk około 2,48 €–3,03 € nettoWstępna wycena jednego wariantu
Při krmení ryb v jezírku zabraňuje nasátí potravy z hladiny do filtrace.
Many door locks have oversized keyholes. Even with a key inserted, there is often enough clearance to see inside. Without a key, visibility is unrestricted. This is a direct privacy issue. This is a minimal, gravity-operated keyhole cover…
We have these handy Fisher space pens for a long time. But it always bugged me that there's no easy way to hang them on the fridge (which is convenient when I want to date tag a can/jar I just opened). And couple of round neodymium…
I have the great party game Cards vs Gravity in the little bag it came with but the zip broke and the contents is forever falling out and in danger of getting lost. I designed this sturdy case that uses either two or four magnets…
Hello, I have a Car Mobile Phone Holder for you - Gravity. The holder is suitable for all sizes of modern phones. It is gravitational - when you put your phone in it, gravity grabs it - and it won't let go! :-D. You have 2 types of…
A remix of the connecting track to force custom supports that strengthen the model during printing
This is a simplified 3D model of a DFRobot Gravity lightning sensor. I created/used it as a reference model while designing the enclosure for a volcanic drone payload project. The model is mainly intended for mechanical fitting, layout…
You can use a plumb line to determine the position of the model's center of gravity.
The Gravity Desk Pilot | 4-in-1 No-Support Organizer 🚀 Stop your cables from falling behind the desk! The Gravity Desk Pilot is a sleek, all-in-one organizer designed to keep your workspace clean and functional. Unlike other holders, this…
Tired of phone stands that sag under the weight of an Ultra or Pro Max smartphone? This Gravity Desk Station is a heavy-duty, professional-grade solution designed for maximum stability and precision. It uses a smart mechanical linkage to…
You need some extra (about 10cm) PTFE tube an a small screw to clamp the tube in the guide. I used 4mm outer diameter tube to add al litte braking, so that the printhead cannot push the filament backwards. This prevents the filament from…
I also hopped on the 3D printed gravity knife craze, I just designed mine with a slightly different approach. The handle is slightly redesigned version of the beautiful Carrot Gravity Toy Knife remix made by Chris Klepel . Have you…
Wydruk około 2,06 €–2,51 € nettoWstępna wycena jednego wariantu
I've remixed this very cool design https://www.printables.com/model/304640-laptop-vertical-gravity-dock to avoid the filament heavyness.
This towelholder uses the power of gravity to grab and hold your towel. Just push it in from below and release it. The gravity will pull it down, the teeth grab it and hold it tight. To release the towel, push it up a little, pull the…
Check out my new Toy Switchblade design here . This is a toy gravity knife I designed. It is fully 3D-printed and requires no hardware or glue to make. If you enjoy the design a like or make would be appreciated. Check out my new fidget…
Check out my new Toy Switchblade design here . This is my gravity utility knife design. I also made a toy blade if you just want to use it as a fidget toy. If you enjoy the design a like or make would be appreciated. Check out my new…
Hello there, I have fixed the oryginal file, to avoid bad looking print of wrong sliced file Changelog (day/month/year): 06.02.2026 ADAM-XCIV commented (in 10.04.2024) “the back part still printed with a seam for me”, So I fixed it! :D…
This version of clip allows you to screw in a PC4-M10 with PTFE Passthrough.
Got a request to make a stand for a gravity bin and this is what I came up with, seems to do the job. May need to add some weight in the base so it doesn't tip when low. May not work for all bins.
I didn't want to buy a whole set of shackles for the hook, so I just designed one to use with a M4 Screw. I printed it with PETG and 100% infill for extra strength, but you could definitely get away with using PLA. I used a M4x20 screw I…
This is my model of the Airbus A320 Gravity Gear Extension Panel for my future homecockpit! VISIT MY COLLECTION “A320 COCKPIT” FOR ALL CURRENTLY AVAILABLE MODELS! The goal is to make an accurate replica, so if you have any specific data…
This remix allows you to mount @LoboCNC's great Gravity Broom Holder on a Gladiator wall system . Build instructions: Filament: PLA or PETG Infill: 15% Supports: Yes, use tree / organic supports on the broom holder only. The gear can be…
