1 / 3
Anti-Peek Keyhole Cover (Gravity Auto-Close)hole cover — zdjęcie 1
1 / 3

Anti-Peek Keyhole Cover (Gravity Auto-Close)hole cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple, gravity-powered keyhole cover that blocks visibility through oversized door keyholes. No springs.

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
48
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Many door locks have oversized keyholes. Even with a key inserted, there is often enough clearance to see inside. Without a key, visibility is unrestricted. This is a direct privacy issue.

This is a minimal, gravity-operated keyhole cover designed to block line-of-sight through the door.

Automatically closes by gravity

No springs, no complex mechanisms

Low failure rate due to simplicity

Design Features

Asymmetric shape covers elongated/horizontal keyholes

Single screw pivot (standard hardware)

Thin profile to avoid interference with key insertion

Smooth rotation with sufficient overlap for full coverage

Designed for quick installation and removal

Printing

No supports required

Recommended: PETG or PLA

Layer height: 0.2 mm

Infill: 20–40%

Orientation: flat on bed

Assembly

Uses one small screw as pivot

Tighten until friction is low but stable

Ensure the cover falls closed under its own weight

Notes

This is a generic design. Adjust dimensions if your keyhole geometry differs.

Tolerances may vary depending on printer calibration.

Use Case

Apartment doors

Interior doors with visibility gaps

Temporary privacy upgrade without modifying the lock

Tagi