TIKTOK GRAVITY KNIFE FIDGET TOY
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
printable gravity knife fidget toy as seen on TikTok
- Ocena
- 4,786 / 5
- Polubienia
- 4139
- Pobrania
- 23 297
- Wydruki
- 230
- Wyświetlenia
- 134 954
- Oceny
- 182
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Based on a popular model seen on TikTok, this fidget toy's files have been very difficult to find. So, I made it myself.
Included in the files are a short, 30mm bladed version similar to the ones seen on TikTok, as well as a longer 50mm and 76mm version.
if you are having trouble with part tolerances, it may be a good idea to tune your printer’s e-steps, extrusion multiplier, x-y expansion, etc. This is a good time to test the capability of your printer.
Requires the following hardware:
x1 M3 nut
x1 M3x16mm socket head cap screw
x2 M3x8mm socket head cap screw
***Be careful not to overtorque your M3x8mm screws. There is a stop built into the hole to prevent the screws from applying too much pressure to the cover, allowing it to swing freely. Do not tighten screws once you feel them bottom out.