Paper Towel/Toilet Paper Holder with "Tear-o-matic" function. Now with auto-adjusting-tube!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stop using both hands to tear a towel like a caveman! Use "Tear-o-matic"!
- Ocena
- 4,5 / 5
- Polubienia
- 36
- Pobrania
- 80
- Wydruki
- 3
- Wyświetlenia
- 1139
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This paper towel holder allows the person in need to tear a piece of paper with only one functioning hand. IT REALLY WORKS =)
Only 60 grams of filament!
!!! Use tube-o-matic for the auto-resizing tube. Diameters of 44mm to 47.5 should be good.
!!! Also released toilet paper holder and wall mount. All parts are interchangeable. Post your hybrid toilet paper-tissues holder hybrids. You'll be able to do it, because now your second hand can take a pictures while you tear a piece of paper of your choice.
Instructions:
- roll the necessary amount of paper down as you normally would.
- to tear just use the bar to tear the paper. When you will engage the bar the paper drum will be locked, to allow you to effortlessly remove the paper.
- That's it! Gravity will do the rest and unlock the drum.
Assembly:
- Print all 3 parts
- mount the handle in the 'MOUNT v2"
- Screw in “tube-o-matic” with M2 screw (25mm long in my case)
Enjoy!