Parametric IKEA Skadis paper towel holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This paper towel holder has a parametric tube in the middle, holding up whatever you're hanging.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 447
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was trying to hang a roll of toilet paper on my pegboard, but didn't have a wooden dowel necessary for the tube in the middle. So i tried the fully 3D printed version of this model, and the holder pieces at each end were too far away from eachother to hold up the roll of toilet paper. In my anger i immediately loaded up Fusion 360 and made a tube that is able to be adjusted with User Parameters, so this will never be an issue again.
P.S. The tube is 9mm in diameter, and 150mm in length. Feel free to change this with parameters