Liczymy pasujące modele…
Backstory In my ongoing quest to keep my workspace tidy and my headphones easily accessible, I found myself searching for the perfect headphone and cable holder for the Multiboard/Multibuild system. To my surprise, nothing quite fit the…
Multiboard/Multibuild holder for your Bil Tema Multimeter (art. 15-133) You would need a Rail popin of your choice. Personally i used a Bolt Locked Insert OXO Rail Pop-in with a Folded Locking Bolt , but there are multiple other options…
Multiboard/Multibuild holder for your Bil Tema Multimeter (art. 15-133) You would need a Rail popin of your choice. Personally i used a Bolt Locked Insert OXO Rail Pop-in with a Folded Locking Bolt , but there are multiple other options…
Backstory In my ongoing quest to keep my workspace tidy and my headphones easily accessible, I found myself searching for the perfect headphone and cable holder for the Multiboard/Multibuild system. To my surprise, nothing quite fit the…
Had some pens on my desk that i wanted to clear out. So made this with a couple of compartments. You would need a Rail popin of your choice. Personally i used a Bolt Locked Insert OXO Rail Pop-in to mount mine - but im sure any other…
Take your soldering setup to the next level with this modular, organized soldering workstation , designed by Aaron Rollens and built for real-world use at FIRST Robotics World Championship . This setup combines an 80/20 extruded aluminum…
This is a simple spray bottle holder for use with MultiBuild plates. You need 2 of the MultiConnect connectors. Fits bottles up to 3mm wide at the trigger / head. No supports needed.
This is a build plate holder for MultiBuild that holds up to 5 3D printer build plates. Fits plates up to 1.3mm thick. Compatible with pretty much any brand of plate. You need 2 of the MultiConnect connectors.
Easily attach and secure Tenda SG105 to Multiboard (Multibuild) grid. horizontal / vertical version securing snaps for vertical version to avoid slide-off Vertical mounting: attach Tenda SG105 onto two pegs, slide it "to the end" snap-in…
Had some pens on my desk that i wanted to clear out. So made this with a couple of compartments. You would need a Rail popin of your choice. Personally i used a Bolt Locked Insert OXO Rail Pop-in to mount mine - but im sure any other…
This is a model I designed to mount a JBL speaker onto multiboard. The best print orientation I've found is with the atachment point facing up using suports under the end points. It can also be used as a holder for other items of similar…
Lets you get 20v DeWalt batteries off the counter. I'd recommend orienting the print so that the smaller flat side is on the bed, so that the layer lines are strong for the battery weight. I'd increase the number of walls as well for…
Lets you get 20v DeWalt batteries off the counter. I'd recommend orienting the print so that the smaller flat side is on the bed, so that the layer lines are strong for the battery weight. I'd increase the number of walls as well for…
Keeps your socket set in reach. The print should be oriented correctly in the file. I'd increase the number of walls as well for strength. I printed mine in PLA; unfortunately I don't have my print settings saved, as I designed this…
Keeps your socket set in reach. The print should be oriented correctly in the file. I'd increase the number of walls as well for strength. I printed mine in PLA; unfortunately I don't have my print settings saved, as I designed this…
Modified my own model for Multiboard: Way to get larger things off the counter and on Multiboard. I'm using mine to hold some headphones near my desk. I'd recommend orienting the print so that its on its side on the bed.. I'd increase the…
Modified my own model for Multiboard: Way to get larger things off the counter and on Multiboard. I'm using mine to hold some headphones near my desk. I'd recommend orienting the print so that its on its side on the bed.. I'd increase the…
Lets you get a DeWalt DCB115 battery charger off the counter; it may work for the lower power charger too. I'd recommend orienting the print so that the smaller bottom side is on the bed, so that the layer lines are strong for the charger…
Lets you get a DeWalt DCB115 battery charger off the counter; it may work for the lower power charger too. I'd recommend orienting the print so that the smaller bottom side is on the bed, so that the layer lines are strong for the charger…
A phone holder for Multiboard/Multibuild. Slides easily on to 2 multiconnect parts - can be found here: Small hole in the center to allow a charger to be attached while phone is in the holder. Max phone width and depth: 80x14 mm
Print with 0.4mm nozzle, 0.2mm speed (or whatever profile your printer does), PLA and default settings (my printer is a Prusa XL 5T) Designed for Narex files and rasps with the handle ferrule at the bottom being 19mm at the bottom of the…
Original authors Narex chisel model with Multibuild/Multiboard pegs instead of HSW mount.
Take your soldering setup to the next level with this modular, organized soldering workstation , designed by Aaron Rollens and built for real-world use at FIRST Robotics World Championship . This setup combines an 80/20 extruded aluminum…
This is a simple spray bottle holder for use with MultiBuild plates. You need 2 of the MultiConnect connectors. Fits bottles up to 3mm wide at the trigger / head. No supports needed.
This is a build plate holder for MultiBuild that holds up to 5 3D printer build plates. Fits plates up to 1.3mm thick. Compatible with pretty much any brand of plate. You need 2 of the MultiConnect connectors.
This is a great small pen and pencil holder designed to hold generic Bic mechanical pencils and pens of similar sizes. Fits perfectly into the multibuild ecosystem and holds 3 pens/pencils comfortably. I've found that it prints best with…
This is another great Multibuild compatible holder for storing one screwdriver. I designed this to fit my specific screwdriver, so it may not fit yours. If you like Multibuild, check out some of my other designs.
UPDATE: V2 IS HERE V2.0 lowered the body of the holder slightly relative to the attachment point for added stability. This helps it to stay attached to the board, which was a problem previously. V2.5 added a second attachment point;…
This is another great addition to your Multibuild ecosystem. There are two variations, one that holds 4 bits and another that holds 3. These work really well. If you like this design, check out some of my others.
Easily attach and secure Tenda SG105 to Multiboard (Multibuild) grid. horizontal / vertical version securing snaps for vertical version to avoid slide-off Vertical mounting: attach Tenda SG105 onto two pegs, slide it "to the end" snap-in…
Bahco five-piece metal file set that i needed a holder for. The only non-original part is the multibuild pegs for obvious reasons.
Ridgid Charger mount Used Small Thread - Fix Point to connect to the multiboard
Two or four of the same part can be used to bolt into each corner of a 19" 1U device. The four snaps and 1U device will in total consume 20x2 CU (500mm x 50mm). Smiley face up, sour face down. Of the two holes, the one closest to the…
If you just want to attach it directly to a wall, use these attachment points . Use as many as you want, minimum 2. Space them out at any interval of 25mm. This battery dispenser features an S-shaped magazine to reduce jamming risk.…
Printed with same settings as the original. This just adds a different mount on the back.
Only tested with a Stanley PowerLock 25ft tape, but figured the dimensions of it would exceed most tapes, so this should support in theory any tape. I also designed the overall depth such that the springing clip stays opened, which I…
Multibuild Multiboard Tool Wall Use a locking T-Bolt to attach the tool holder to the support bracket . Use a moderate or heavy weight bearing snap for top connection of the support to the multiboard and normal snap for the bottom…
I have created this holder for the Parkside PAGG 4 A1 engraver from Lidl as there doesn't seem to be any other holders that fit this device already available. At the side is a slot for the plastic templates which come with the device. I…
Support only for the upper hex slot. Recommended to print out of something more solid than PETG. PC would work the best.
Designed for mounting a Dewalt atomic drill upside to the Multiboard but can work for most battery powered tools with a flared bottom for the battery. Tested with Dewalt and Ryobi tools Components needed 2 4x4 support bracket 4 locking…
Better bolt gripping with square S3 bit instead of coin slot Extended from 9.5mm to 16mm to better secure my 10mm thick tool holders Check out the rest of my custom collection
