Multibuild Wiimote Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remixed version of the Wiimote holder by joen_p for use with the Multibuild/Multiboard system
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Remixed from Joen_P's remix of the original Wiimote holder from SilverSasquatch, this was modified for use with the Multiboard/Multibuild system. The mounting holes were moved to fit the 50mm "small thread" spacing in the multibuild system and additional spacing was put around the mount holes so the flush face threads could be used to mount this in place.
I've included the FreeCAD file I used to remix things, though it was a quick and dirty fix, so you might want to start fresh with the original models if you wanted to make other changes. The 3mf file includes the remixed mount, and the two original nunchuck attachments for printing everything at once.