RÅSKOG and RÅSHULT Multiboard/Multibuild Mount - Double Sided Snap Version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a double sided snap version (part A) of the RÅSKOG and RÅSHULT Multiboard/Multibuild Mount by Brett Hampton
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I loved the Multiboard mount made by @BrettHampton_325208 for Ikea RÅSKOG and RÅSHULT utility carts, but I found the regular snaps used in the original model to be a bit too loose for my taste. With this remix the boards stay on tight enough that you can pull the cart using the boards!
This model uses the Multiboard type "A" snaps, so you'll need to use print two type "B" snaps (https://thangs.com/designer/MultiBuild/3d-model/Snap%20%28DS%20Part%20B%29-1323061) for each mount.
Printing instructions are the same as the original model and requires M4X30mm bolt with a M4 nut.
Thanks to Jonathan from Keep Making for creating Multiboard/Multibuild!