1 / 1
Aranet 4 CO2 Monitor Angled Mount for Multiboard / Multibuild Fix Point — zdjęcie 1

Aranet 4 CO2 Monitor Angled Mount for Multiboard / Multibuild Fix Point

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holds an Aranet 4 sensor at an angle

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
19
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Holds an Aranet4 CO2 sensor at a 45-degree angle. This would be useful in a situation where you are perpendicular from the Multiboard. This mount slots into the keyhole on the back of the sensor, allowing for hardware-less mounting.

Prints upright with no supports required. May fit the other Aranet sensors with the same form factor.

Model as provided points to the left but could be mirrored.

Requires 2 of the fix point mounts.

Tagi