OpenGrid (with screw holes) Snap Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tool to apply a little more force, for snapping OpenGrid panels together.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 326
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created this piece to help snap large OpenGrid panels together. It's designed to work specifically with the opengrid panels with a multiboard-style threaded hole.
I designed this to be used with some kind of vice (several 3D print-in-place designs are available) and they install to the 2nd row, which is thicker and helps distribute the force. The clamp faces sit 80mm apart, so you will need a clamp or vice with at least that clearance. I found that large panels require a high amount of force to snap together, but I'm also using PETG for everything.
Use OpenGrid print settings, but increase to 4 or 5 walls for extra durability. Print as shown, no supports should be needed.