openConnect 8 sharpening stones holder - openGrid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for 8 sharpening stones made for openGrid using openConnect connectors.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Sharpening stone holder for openGrid using the openConnect connector.
The holder was designed using mitufy's openConnect - General Holder Generator, it's designed to hold eight stones.
It is designed to hold my “diamond” stones, I believe it'll be suited to hold any similar sized stones. The dimentions of my stones are 160mm x 23.2mm x 8.2mm, the holes on the holder measure 25mm x 9mm.
I've printed mine in some generic PETG, it'll print fine in most materials.
What's needed to use this model:
An openGrid board, at least 2x2. My preffred board generator is the one provided by Perplexing Labs.
4 openConnect snaps. I use the expanding model published by mitufy