1 / 1
Two-Sided Tape / Command Strip Mount for openGrid
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A flat, two-slot two-sided tape / command strip mount for openGrid that's easy to print and visually discreet.
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 178
- Wydruki
- 1
- Wyświetlenia
- 914
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (63)Powiązane
Yet another command strip / Tesa Powerstrip / two-sided tape mount for the openGrid system.
I had the following design goals in mind:
- Easy to print
- Visually occupying only two slots
- Should be visually "living room compatible" from the front, having a flat surface
- Not using a directional snap, which would make detaching the grid without removing the strip difficult
- Still a strong and reliable connection (by using two bare snaps)
The plate is 1 mm thick, and your adhesive tape / command strip will also add a bit to that. Therefore, your grid will be offset about 1-3 mm from the wall.
You may need to cut your strip / tape to the right size.
Printing: Print it with the plate on the bed and the snaps pointing upwards.