1 / 1
Two-Sided Tape / Command Strip Mount for openGrid
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A flat, two-slot two-sided tape / command strip mount for openGrid that's easy to print and visually discreet.
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 178
- Makes
- 1
- Views
- 914
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
Yet another command strip / Tesa Powerstrip / two-sided tape mount for the openGrid system.
I had the following design goals in mind:
- Easy to print
- Visually occupying only two slots
- Should be visually "living room compatible" from the front, having a flat surface
- Not using a directional snap, which would make detaching the grid without removing the strip difficult
- Still a strong and reliable connection (by using two bare snaps)
The plate is 1 mm thick, and your adhesive tape / command strip will also add a bit to that. Therefore, your grid will be offset about 1-3 mm from the wall.
You may need to cut your strip / tape to the right size.
Printing: Print it with the plate on the bed and the snaps pointing upwards.