openGrid Lite - Multiconnect Snaps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multiconnect standard and directional snaps for openGrid Lite.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 111
- Wydruki
- 0
- Wyświetlenia
- 348
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
The openGrid models included Multiconnect snaps with a threaded snap and a screw-in multiconnect connector. I made these simple snaps have the multiconnect connector as part of the snap. There are 2 different snaps, one using the standard snap (pushes straight into the openGrid tile) and one using the directional snap (an arrow on the back indicates the side that goes in first). These were made from the modeling files that David D provided with the openGrid and Multiconnect frameworks.
My test prints were done in PLA with 3 walls and 15% gyroid infill.
These are the openGrid Lite version of my openGrid Multiconnect Snaps.
Also available: