Fanatec CSL DD Side Mount for Simul8r
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter to mount a Fanatec CSL DD in the top head tube of the Simul8r racing cockpit.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 483
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an adapter to mount a Fanatec CSL DD in the top head tube of the Simul8r racing cockpit.
Parts needed:
8 x M6x8mm t-slot nuts. Wheel base includes 4 but you will need to purchase 4 more
8 x M6x20mm cap screws
2-4 M6 bolts with nuts and washers to fasten the mount to the PVC.
To install, insert 4 bolts into the mount and start the t-nuts a couple turns. Take the mount and slide onto the wheel base as far as it can go while trying to center it on the wheel base. Do the same for the opposite side. Try to get the spacing as close to eachother as you can. Next, install the assembly onto the simul8r tubes. Sit in the seat and feel what is most comfortable and mark the alignment. With your marks aligned, drill holes through the mount and PVC. Install some M6 bolts through the holes
Simul8r: https://alvinnieves.wordpress.com/2013/04/27/building-my-rig-a-simul8r-design-to-the-world/