1 / 4
Fanatec Wheel 8020 Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wheel mount for the QR1 for Fanatec wheels so you can attach them somewhere on your 8020 rig.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have provided a ready to print .3mf file. I have printed this in Bambu Matte Red and Sunlu Matte Olive Green successfuly.
The improved shaft design was modeled in Blender however the new bolt pattern was done in the slicer.
Considerations:
- If you want some flex consider using PETG but I've not tested this
- You don't have to use 11 bottom layers but I did to prevent crushing when the hardware is tightened
- 10% Gyroid is pretty strong but you can opt for more if you prefer it, I don't see the point
- I ran this with the filament at 200c, onto a 60c bed with a 40% aux fan however this probably isn't neccessary
This is stronger tha the original but obviously if you hit it hard enough it doesn't matter, it will break. Again, PETG or some other more suitable material will improve this significantly. I am using PLA because I want red.