Tanlenki wheel emulator holder for Fanatec QR
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This 3D print will place the wheel emulator dongle just at the right place.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 332
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Instead of leaving the wheel emulator dongle inside the QR and to avoid forgetting it inside. This 3D print will place the wheel emulator dongle just at the right place. And no need to fish the dongle after use.
The wheel emulator dongle is from tanlenki (bought on aliexpress). It is inserted using a bit of force, but It's on purpose, it's a friction insertion to avoid it to turn and get damaged.
The model include a small arrow to match the arrow on the wheel emulator dongle, don't forget to align them when you lock it in place. It can be turn but you will need some tools.
Printed on Prusa mini and tested/approved on original Fanatec QR2.
Small stats of waste before doing it right :
- 2 prototypes for a good friction fit
- 1 prototype for screws pattern
- 2 prototypes for the internal fit inside QR
- 1 prototype to adapt overall length
Changes :
- 2025-07-14 19:00 : Updated STL file, v1.1.0, shorter because previous one introduced some play in the QR.