1 / 12
SIMHub dashboard for Moza R5, R9, R12 and Fanatec CLS DD (may be others) — zdjęcie 1
1 / 12

SIMHub dashboard for Moza R5, R9, R12 and Fanatec CLS DD (may be others)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

SIMHub dashboard for Moza R5, R9, R12 and Fanatec CLS DD (may be others)

Ocena
5 / 5
Polubienia
47
Pobrania
79
Wydruki
1
Wyświetlenia
3039
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I DID THIS JUST FOR MYSELF AND FOR A FRIEND, ACTUALLY I DIDN'T REALLY WANT TO SHARE IT, SO I APOLOGIZE FOR ANY FLAWS.

In order for the face to be transparent, but at the same time darkened, it must be printed from transparent plastic with a line width of 0.6-0.7 mm on the first layer (I used PETG) and then a tinting film for cars with a light transmission of 5%

To better lock the led ring, you will need to slightly sand the inner diameter of the two rectangles (there are bumps on the model, follow them).

Orientation of printing parts

Nuts insert here

Screw holders needs to be printed with a brim.

To insert the screw into the holder, you need to sand the two sides of the head. After inserting, I recommend filling the hole with superglue and baking soda so that the screw does not fall out.

Wiring diagram for SIMHub

_____________________________________________________________________________________________________

Necessary:

Srews and nuts

Dash mount

________________________________________________________________________________________________________________

Electronics

Dupont Line 15cm female wires for soldering only arduino or any other wires for soldering direct to components and arduino.

To avoid problems with bending the data type-c cable, I recommend angle adapter type-C female to male.
I thought "style D" was the best option.

 

If you are interested in more details, feel free to ask me in the comments.

Tagi