1 / 6
Fanatec Clubsport Pedals V3 Load Cell Bracket — zdjęcie 1
1 / 6

Fanatec Clubsport Pedals V3 Load Cell Bracket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A bracket to hold a generic load cell. For the brake pedal of a Fanatec Clubsport Pedals V3 set

Ocena
0 / 5
Polubienia
6
Pobrania
35
Wydruki
0
Wyświetlenia
349
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Public Domain

This is a bracket to hold an off the shelf replacement load cell.  I used one rated up to 200 Kg.

My Fanatec Clubsport Pedals V3 had failed.  It started to provide inconsistent readings, and one day it stopped working altogether.  There was no sign of any physical damage.

I have included the Fusion 360 (.f3d) file if anyone wants to make modifications.

Wiring was straightforward.  The new load cell wires matched the 4 wires from the original.

Fanatec black to load cell black (EXC-)

Fanatec red to load cell red (EXC+)

Fanatec white to load cell white (SIG-)

Fanatec green to load cell green (SIG+)

 

Note that you should load the Fanatec Control Panel software and recalibrate your pedals once you have the replacement load cell installed.  There's a toggle switch under the Pedals Calibration section called “Manual Calibration Mode”.   Toggle it to so you are in Automatic calibration.  Press the “Reset Automatic Calibration” button to reset all the  pedal settings.  You can toggle the “Manual Calibration Mode” back to Manual calibration and setup your pedals to your liking.  I did not do this initially and it took the weight of an elephant to get the brake pedal to 100%. 

The bracket is designed to use washers (with outer diameter of 25-26mm) to shim behind  the load cell.   You can use 25 cent quarter if your don't have the correct size  washer.  I use  two washers stacked - how many will vary depending on how thick your washers are.  Initially I was just going to fill this area with filament, but decided that the back of the load cell should have something fairly solid.  Tip: stick the washer(s) in place, then place a piece of tape so the washers don't fall out.

Sorry, I don't have any actual pictures of my bracket.  I have included a picture of a replacement load cell kit.  This was the inspiration for what I made - it looks nice and probably is worth what it costs.

You can find the generic load cell on ebay or AliExpress.

 

Tagi