54 modeli
Overview I've struggled with knee pain while sim racing on my Fanatec Clubsport V3 pedals due to the brake pedal placement. Some folks have successfully swapped the brake and clutch pedals to help with this, but I think this is a sub-par…
Mounting solution for the Fanatec ClubSport DD/DD+ power brick, Series 15 & 40 aluminum extrusion with M8 bolts and t-nuts. Print two mounts The Series 15 that I modeled the mounting to is from tnutz.com and has a 38.10mm spacing from the…
I have designed these parts to provide a mounting solution for the SIMAGIC P-HPR to the Fanatec ClubSport Pedals V3. There are two types of bracket, one which utilizes the SIMAGIC P2000 Haptic Module Bracket (included in a kit with some…
This cupholder attaches to the 2-inch OD frame tubes and features options for both a 90mm and 100mm inner diameter holder with cutouts for mug handles. Stay hydrated with the beverage of your choice while enjoying the convenience of this…
This general use platform is perfect for holding a mouse and includes an added cubby for storing small items. Can be printed without supports.
The stopper nut broke on my Fanatec CSW V1 and i decided to design one due Fanatec doesn't supply any part for V1 wheelbase.
This simple hook latches on to the tube profiles of the Fanatec Clubspot GT sim racing cockpit cockpit and can hold keyboards, controllers and other accessories.
I customised a washer to make a spacer when attaching the Fanatec Handbrake to the Fanatec Shifter. When the shifter is set up on your right, I found the handbrake to be very close to gear shift when shifting into 5th and 7th (Not I have…
here is a very simple mount for the simagic P-HPR haptic feedback motors to mount them on the Fanatec ClubSport V3 pedals with the D-pads installed. I used two M6 screws and screw nuts to tighten them onto the pedals, and the motors are…
Will work with Elgato flex arms and other such 3rd party mounting solutions. Pick the corresponding file for either Steam Deck + , Stream Deck MK.2 https://www.elgato.com/us/en/p/heavy-clamp https://www.elgato.com/us/en/p/flex-arm-l…
Slides over the handbrake plastic cylinder in place of the foam grip. Designed for TPU 0.4mm Nozzle 2x Walls 10% Gyroid Infill (More if you want less ‘squish’) Use your slicer to add custom text
A Vertical Mount - Great for SimHub button boxes and reading chat. A Horizontal Mount - Great for OBS, Secondary Display, and info readouts. A Hanger that attaches to the CS GT COCKPIT ACCESSORY RAIL Each vertical or horizontal mount will…
I like the design, but found it needed a few improvements as listed in the remix section. My haptics caused the shelf and mouse to rattle. Solved with a mousepad, rim, and cabinet bumpers. It also needed a cupholder option. The cupholder…
This phone holder is designed to accommodate a wide variety of current-generation smartphones, including those with thin cases. It mounts securely to the upper accessory rails of the CS GT cockpit.
Side bracket for 40x40mm aluminum profiles for Fanatec Clubsport DD Pro / CLS DD / DD or DD+ Wheel Base's. The model is available for free download and use. If you still want to invite me for a coffee for my effort, troubles and time or…
Dayton TT25 Bass Shaker Mount for V3's.
This is a mounting for the Fanatec ClubSport DD+ Power Supply. You can mount it on any Aluminium Profile 80x40 with 4xM8 srews.
*Updated the mounts with the official dimension from Fanatec, look for the V2 files!* This is a mount for the Fanatec Clubsport GT Cockpit. this is different from the ones that are available for purchasing. when mounted these mounts…
Of course there are several other Mag-Shifter Mods out there, but one of the main issues i had with them: They all relied on glueing magnets to the plastic. Which i think is neither nice to look at, nor very long term stable. Since these…
Installation Guide: https://github.com/team-sillex/simracing_mods/tree/main/ClubSport%20Pedals%20V3%20Clutch%20delete Category: Automotive
The thread is a M12x1.5 with a thread length of 20mm
Quick Basic Mobiel Phone Holder for SimHub which bolts up to the front of the new Clubsport DD wheelbases. 4x Sizes, measure the width of your mobile and print the appropriate model.
This adapter allows you to use cheap AliExpress / Temu aluminum replica shifter knobs with a Fanatec ClubSport SQ V 1.5 Shifter. I made this model to fix a specific issue I had with similar models I found on Printables and elsewhere: the…
This is an adapter for my SKRS truck shifter to nicely fit on the Fanatec Clubsport 1.5. I know there are a bunch of SKRS shifters available, but be my guest to alter it to your specific needs UPDATE!! After playing some ATS and ETS2, I…
A simple model to hold spare shifter knobs for people who switch the shifter modes often. 2 M6 x 15mm and 2 t-nuts are needed to mount on 4040 profiles.
This is a cable/connector protector for the Fanatec Clubsport Handbrake. For this protector there is no case mod needed. Just remove the screw and cable. Put the cover with the one side into the two screw holes. Then attach it with the…
Adds a ledge to the original Fanatec ClubSport DD/DD+ Mount so it can be mounted vertically as not every simrig has a 4080 support that is horizontal.
Direct 8040 mount for the Fanatec Clubsport Shifter SQ. Allows left, right, or, centre mounting on aluminium profile. The shifter is big and heavy so will flex a little on this mount. You can reduce this by placing a second piece of…
Two of these brackets can be attached to the side of the Fanatec shifter using the T-nuts which come with it. This allows a small shelf to be mounted on top of the brackets. The shelf could be made of wood (which is what I did) or…
Was learning fusion 360 so I wanted to have a go at creating a set of magnetic shifter upgrades for my ClubSport Formula wheel rim. It's a Remix of thing:4053974 but redesigned and redrawn to shave off some mass and print time whilst…
This simple model represents a section of our extruded rail, designed to mount accessories or anything your imagination can conceive. The intent is for you to use the STEP model to create parts that mount to the actual extrusion of your…
Model is basically an enlarged version of the provided bracket, which fits the holes of the plastic pedal. Use screws that came with the P-HPR, and I think it's a m4 nut on the other side.
Ein Upgrade der ursprünglichen Motorhalterungen, bei dem der Motor höher platziert wird, wodurch der Vibrationseffekt erhöht wird.
This is a bracket to hold an off the shelf replacement load cell. I used one rated up to 200 Kg. My Fanatec Clubsport Pedals V3 had failed. It started to provide inconsistent readings, and one day it stopped working altogether. There was…
This adapter allows you to mount the Moza Multi-function Stalks onto a Fanatec ClubSport DD or DD+ wheelbase with QR2. A 60mm shaft extension is required. I used the ClubSport DD/DD+ Shaft Extension from Simube . Using a ClubSport Wheel…
I got the Fanatec Clubsport pedals V1 which come with open PCBs for the gas and clutch sensors. The newer models come with covers but the early versions didn't. This is purely aesthetics and just looks better, never had a problem without…
Since I was tired of external power supplies always lying around, here’s a simple solution. I mounted the PSU directly to my aluminum sim rig to keep things tidy. To mount it, you’ll need two M8 hex bolts and, for a 40 I-type aluminum…
*UPDATED the mounts using the official Fanatec rail model, look for the V2 files!* these files are mounts and parts to make your own iFlag and Buttonbox. both of these use the same 50x50 mounting patern which i intend to use for more…
Porsche 911 GT2 RS Clubsport as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
Front tube plug adapter for Fanatec ClubSport GT Cockpit to mount a Simagic kill switch. Runs the cable inside the tube. My plug locking points were slightly too large to sit perfectly flush, I reduced the diameter by 0.4mm, but I have…
Been looking for some replacement pedals, and couldn't find any that I liked, so I designed my own. Designed with heel-toe in mind, and grip much better than the stock metal pedals. Made mine from Sunlu PA6-CF, and added the words on my…
Piece to hold a single 10x5mm neodymium magnet per shifter. It requires 2 M3 screws to hold it to the Hub. It does not require to disassembly the hub. It does not require glue to hold the magnet in place (I guess it will depend a bit on…
Adapter to mount an 50mm Quickrelease on an Fanatec Wheel The Height of 25mm fits on a Simagic QR50. Other Quickreleases should fit, but cant confirm, i made additional Spacers to change the Distance between QR and Wheel. I added an 6.5mm…
Couldn't find any pedals for the Fanatec ClubSport V2/V3 that were good with heel-toe down shifting, so I designed my own.
Simple Spacer for all Fanatec Quickreleases. Additional i added a cable clamp for an coiled cable(USB Conversion): https://simracingmachines.com/products/conversion-kit-7-2x-mini Simply add the Spacer between the QR and your Wheel, to…
0,2mm layer 15% infill no supports Print with TPU
Version of my Dayton Audio BST-1 bass shaker mount for the four corners of Fanatec's ClubSport GT cockpit to be cut from sheet metal from SendCutSend or similar. I suggest 3.4mm Mild Steel. I also have a version for 3D printing, ideally…
Print in any filament you want, the one in the picture is printed in Siraya Tech TPU Air With 10 walls and 50% gyroid infill You must use support or the 3MF file which has support included Happy printing
Fanatec Kabelclip Clubsport DD+ für Aluminium-Rigs Fanatec DD Extreme Kabelclip für 40x40 oder 40x60 mm Aluminiumprofil-Rigs. Löcher für M8x20 mit flachem Kopf. Kabelführung für Ihr Simrig.
Revised printed version of a Dayton Audio BST-1 bass shaker mount for the four corners of Fanatec's ClubSport GT cockpit. I revised my original to point the wire studs at the cockpit with a hole underneath the studs to route the speaker…
Clamp to attached a Fanatec QR2 mount to the 50mm diameter round tubes of Fanatec's ClubSport GT Cockpit or ClubSport GT Monitor Stand. Also a square version for the monitor stand's 50mm square tubes. This is the clamp only. Download the…
Français Frein à main pour sim racing sur base fanatec Pour pouvoir l'utiliser comme un fanatec clubsport handbrake v2, il vous faudra une prise rj12 et un potentiomètre 10kΩ que vous devrez raccorder comme cela: +5v : rj12 pin 1 ->…
Adapter to mount an 50mm Quickrelease on an Fanatec Wheel The Height of 25mm fits on a Simagic QR50. Other Quickreleases should fit, but cant confirm, i made additional Spacers to change the Distance between QR and Wheel. I added an 6.5mm…
Depending on how you've set up your rig, cables are always an eyesore. On the Fanatec shifter, the cables stick right out in the back, making for an eyesore when watched from the side. Print this cover in normal PLA, or PETG if you want.…
