Fanatec Clubsport Cockpit iFlag & Buttonbox Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fanatec Clubsport Cockpit iFlag & Buttonbox Mount. this uses a clamping design for different accessories.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 342
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Standard Digital File License
*UPDATED the mounts using the official Fanatec rail model, look for the V2 files!*
these files are mounts and parts to make your own iFlag and Buttonbox.
both of these use the same 50x50 mounting patern which i intend to use for more projects.
hardware for the 50x50 mount is:
1x M3 screw 30mm
1x M3 nut
4x M3 screw 20mm
hardware for the iFlag is:
4x M3 nut
1x Arduino Nano
1x 8x8 RGB WS2812 LED matrix
bit of wire to solder 3 wires from nano to led matrix
bit of glue for the M3 nuts.
optional is a piece of tinted/clear plexiglass (around 66mm x 66mm)
hardware for the Buttonbox:
4x flip up toggle switches
16x switch with a 16mm diametor hole
4x rotary encoder (EC11)
A lot of wire to solder wires from buttons/encoders to BBI64
1x Leo Bodnar BBI64 or similar(it should be around 32 inputs so a BBI32 should work?)
4x M3 nut
bit of glue for the M3 nuts.
if you are looking for the poles to mount it to the Clubsport Cockpit then have a look at my other models posted.
everything has to be tested