1 / 9
Fanatec Clubsport Formula Magnetic Shifter Upgrade — zdjęcie 1
1 / 9

Fanatec Clubsport Formula Magnetic Shifter Upgrade

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Another Magnetic Shifter Mod ;)

Ocena
0 / 5
Polubienia
5
Pobrania
52
Wydruki
0
Wyświetlenia
689
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution

Was learning fusion 360 so I wanted to have a go at creating a set of magnetic shifter upgrades for my ClubSport Formula wheel rim.

It's a Remix of thing:4053974 but redesigned and redrawn to shave off some mass and print time whilst maintaining structural integrity.

I embossed the Fanatec 'F' into the back parts for this there is a left and right version which will need to be printed so it is the right way up on both sides when fitted. I have also included a blank one if you prefer that.

Print with support to support the holes for the magnets underneath, you might get away without it if you have good bridging

In addition to the print you will need 4x 10mm round magnets at around 5mm thick. Mine where just short at 4.73mm but the recess holes are 5mm deep. These will need to be glued in place. You can use shallower magnets but might need a bit of packing.

You can use the included screws for the main part to fix it to the back of the wheel but you will need some slightly longer 10mm M3 screws for the part that fits on the shifter arm as this is now about 3mm thicker.

Check out my other Sim Racing/Fanatec designs

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3 Pro

Rafts:

No

Supports: 

Yes - Baseplate only

Resolution:

200

Infill: 

20-30%

Filament: Eryone PLA 
 

Notes:

Only needs support from baseplate for holes underneath where the magnets go.

Category: Video Games

Tagi